great charger
I received it around 3 days after purchasing
No complaints
Great for model building
Usually ready in 4 hours
Order over the phone? Call us now.
1-800-905-0410Learn more about our Price match policy
I bought this charger to replace the expensive and fragile German made chargers and so far have been pleased. If it is connected to a car and run on battery charge setting, it tends to supply overvoltage, as much as 15.6 volts and has caused overvoltage faults in control modules. If it is run on flash reprogram setting, I set the voltage to 14.8 and have had no problems. The fans are a little noisy, but in a busy shop, not too noitceable.
Thank you for the item is working just grate an I'm recommended this product some won hu work on high tech vehicles like programming and coding and thanks for fast shipment .
Tired of fighting with battery chargers that "sort of" work some times. Had a Craftsman "Smart Charger" blow a battery up by overcharging, and fail to charge AGM batteries that it was supposed to. The new Schumacher works so much better. Actually managed to disulfide a couple old batteries I was keeping just for cores. Also managed to charge my DieHard Platinum batteries when everything else failed.
A professional charger and clean power unit. I'm a heavy duty diagnostic specialist. I do allot of reprogramming I can set the voltage and not worry about it when re-flashing a module. The charger side is great, connect it, set it, and it takes care of it self. No more resetting a timer and worrying about over charging a battery.
Just a update,I've had this charger for over a year now, I've had no issues with it.
Second update, January 2016, I'm still using the charger. A co-worker borrowed it and accidentally connected it backwards to recharge a battery didn't hurt it bit. It still works just like new. I noticed the price has gone up quite a bit from what I paid but it's still a good deal.
We saved several hundred dollars by buying this unit and the cart only takes up more room. Must have for programming BMW and other cars that require a stable voltage while programming.
Schumacher's 100A international, fully automatic battery charger/power supply is designed for regular automotive, lead-acid, calcium, AGM, start-stop, and gel cell batteries. Maintains stable voltage under varying loads during major vehicle ECU reprogramming and diagnostic work. Voltage can be set between 13.0-14.8V, and includes a digital Volts and Amps display. Microprocessor-controlled, with a manual mode with digital timer. Includes extended reach output cables, and adjustable mounting brackets for easy permanent installation to most shop vehicle lifts. Also features dual temperature-controlled cooling fans.
Features
Fully automatic battery charger for regular automotive, lead-acid, calcium, AGM, start-stop, and gel cell batteries
Adjustable mounting brackets for easy permanent installation to most shop vehicle lifts
Voltage can be set between 13.0 - 14.8 volts
Manual mode with digital timer
Heavy - duty clamps with replaceable jaws
Specifications
Manufacturer : Schumacher
Brand : Schumacher
Item Weight : 16 pounds
Product Dimensions : 10 x 8 x 5 inches
Item model number : INC100
Manufacturer Part Number : INC100
Cover Included : Schumacher INC100 100A 12V DOE Battery Charger and Power Supply
ASIN : B0756NVGHV
Customer Reviews : 4.3 out of 5 stars 109 ratings 4.3 out of 5 stars
Best Sellers Rank : #46,957 in Automotive (See Top 100 in Automotive) #180 in Battery Chargers #719 in Automotive Replacement Batteries & Accessories
Date First Available : August 28, 2017
We are offering a 30-day money-back guarantee!
If you are not satisfied with your purchase within 30 days of receiving the product, you can ship it back to us for a refund or exchange.
Before returning the item, kindly send us a request using the Self-Serve Return option or contact our customer support team to get your return authorization. You may contact us by email at support@mprtools.com, phone at 1-800-905-0410, or chat through our website. We are available Monday to Friday from 8 am to 5 pm ET.
We want to guarantee your experience with us will be outstanding. Here are just a few of the reasons why mprtools.com is the go-to company to get your tools from:
We work very hard to ensure we offer the absolute best prices online. If you find it at a lower price somewhere else within 365 days of purchasing, please message us, and we’ll credit you back the difference right away.
It's our duty to provide superior quality tools you can trust to get the job done. If you're not fully satisfied with your order, you can request a return for a complete reimbursement.
I bought this charger to replace the expensive and fragile German made chargers and so far have been pleased. If it is connected to a car and run on battery charge setting, it tends to supply overvoltage, as much as 15.6 volts and has caused overvoltage faults in control modules. If it is run on flash reprogram setting, I set the voltage to 14.8 and have had no problems. The fans are a little noisy, but in a busy shop, not too noitceable.
Thank you for the item is working just grate an I'm recommended this product some won hu work on high tech vehicles like programming and coding and thanks for fast shipment .
Tired of fighting with battery chargers that "sort of" work some times. Had a Craftsman "Smart Charger" blow a battery up by overcharging, and fail to charge AGM batteries that it was supposed to. The new Schumacher works so much better. Actually managed to disulfide a couple old batteries I was keeping just for cores. Also managed to charge my DieHard Platinum batteries when everything else failed.
A professional charger and clean power unit. I'm a heavy duty diagnostic specialist. I do allot of reprogramming I can set the voltage and not worry about it when re-flashing a module. The charger side is great, connect it, set it, and it takes care of it self. No more resetting a timer and worrying about over charging a battery.
Just a update,I've had this charger for over a year now, I've had no issues with it.
Second update, January 2016, I'm still using the charger. A co-worker borrowed it and accidentally connected it backwards to recharge a battery didn't hurt it bit. It still works just like new. I noticed the price has gone up quite a bit from what I paid but it's still a good deal.
We saved several hundred dollars by buying this unit and the cart only takes up more room. Must have for programming BMW and other cars that require a stable voltage while programming.
Schumacher's 100A international, fully automatic battery charger/power supply is designed for regular automotive, lead-acid, calcium, AGM, start-stop, and gel cell batteries. Maintains stable voltage under varying loads during major vehicle ECU reprogramming and diagnostic work. Voltage can be set between 13.0-14.8V, and includes a digital Volts and Amps display. Microprocessor-controlled, with a manual mode with digital timer. Includes extended reach output cables, and adjustable mounting brackets for easy permanent installation to most shop vehicle lifts. Also features dual temperature-controlled cooling fans.
Features
Fully automatic battery charger for regular automotive, lead-acid, calcium, AGM, start-stop, and gel cell batteries
Adjustable mounting brackets for easy permanent installation to most shop vehicle lifts
Voltage can be set between 13.0 - 14.8 volts
Manual mode with digital timer
Heavy - duty clamps with replaceable jaws
Specifications
Manufacturer : Schumacher
Brand : Schumacher
Item Weight : 16 pounds
Product Dimensions : 10 x 8 x 5 inches
Item model number : INC100
Manufacturer Part Number : INC100
Cover Included : Schumacher INC100 100A 12V DOE Battery Charger and Power Supply
ASIN : B0756NVGHV
Customer Reviews : 4.3 out of 5 stars 109 ratings 4.3 out of 5 stars
Best Sellers Rank : #46,957 in Automotive (See Top 100 in Automotive) #180 in Battery Chargers #719 in Automotive Replacement Batteries & Accessories
Date First Available : August 28, 2017
We are offering a 30-day money-back guarantee!
If you are not satisfied with your purchase within 30 days of receiving the product, you can ship it back to us for a refund or exchange.
Before returning the item, kindly send us a request using the Self-Serve Return option or contact our customer support team to get your return authorization. You may contact us by email at support@mprtools.com, phone at 1-800-905-0410, or chat through our website. We are available Monday to Friday from 8 am to 5 pm ET.
We want to guarantee your experience with us will be outstanding. Here are just a few of the reasons why mprtools.com is the go-to company to get your tools from:
We work very hard to ensure we offer the absolute best prices online. If you find it at a lower price somewhere else within 365 days of purchasing, please message us, and we’ll credit you back the difference right away.
It's our duty to provide superior quality tools you can trust to get the job done. If you're not fully satisfied with your order, you can request a return for a complete reimbursement.
I bought this charger to replace the expensive and fragile German made chargers and so far have been pleased. If it is connected to a car and run on battery charge setting, it tends to supply overvoltage, as much as 15.6 volts and has caused overvoltage faults in control modules. If it is run on flash reprogram setting, I set the voltage to 14.8 and have had no problems. The fans are a little noisy, but in a busy shop, not too noitceable.
Thank you for the item is working just grate an I'm recommended this product some won hu work on high tech vehicles like programming and coding and thanks for fast shipment .
Tired of fighting with battery chargers that "sort of" work some times. Had a Craftsman "Smart Charger" blow a battery up by overcharging, and fail to charge AGM batteries that it was supposed to. The new Schumacher works so much better. Actually managed to disulfide a couple old batteries I was keeping just for cores. Also managed to charge my DieHard Platinum batteries when everything else failed.
A professional charger and clean power unit. I'm a heavy duty diagnostic specialist. I do allot of reprogramming I can set the voltage and not worry about it when re-flashing a module. The charger side is great, connect it, set it, and it takes care of it self. No more resetting a timer and worrying about over charging a battery.
Just a update,I've had this charger for over a year now, I've had no issues with it.
Second update, January 2016, I'm still using the charger. A co-worker borrowed it and accidentally connected it backwards to recharge a battery didn't hurt it bit. It still works just like new. I noticed the price has gone up quite a bit from what I paid but it's still a good deal.
We saved several hundred dollars by buying this unit and the cart only takes up more room. Must have for programming BMW and other cars that require a stable voltage while programming.
Sign up to get the latest guides and special offers sent to your inbox.
1-800-905-0410 (Toll Free)
support@mprtools.com
Opening Hours
Mon - Fri: 8 am - 5 pm ET
Sat & Sun: Closed
great charger
I received it around 3 days after purchasing
No complaints
Great for model building