Great price and excellent tools.
Works very well and last long
Order over the phone? Call us now.
1-800-905-0410Learn more about our Price match policy
I purchased this puller to remove a John Deere GT245 electric PTO clutch AM126100 without damage. It is perfectly sized for the job and worked amazingly well to remove a clutch that was siezed almost permanently on the engine shaft. It truly is a quality tool.
I used this "Hub Grappler" puller to extract a hub from the front wheel bearing on a Subaru Outback, without having to remove the steering knuckle. This puller did a solid job getting the hub out without any damage and actually made easy work out of it.
The package says "Made in the USA of globally sourced components". I have to say, it's extremely well made. THICK, durable metal, which is coated to prevent rusting. The jaws are remarkably thick and sturdy - I would say professional grade. The forcing bolt and nut are nice and snug, made to high tolerance.
I would recommend putting anti-seize lube on the bolt and nut for longevity.
Great job, OTC!
Works great, very stable. OTC has stepped up by adding this to a great puller set. Wish this had been around sooner.
I usually find pulling the hub out of a wheel bearing is the toughest part of replacing a bearing. I usually use my 20 ton press until I bought this tool
I have used this puller three times so far and it has made pulling the hubs out of the FWD front wheel bearings much easier. I even used that bolt with my bearing puller kit making removing and installing the bearing easier too. Always grease up that bolt!
This OTC 6575 Hub Grappler Puller and the HarborFreight Front Wheel Bearing Adapter made taking out the front wheel hubs for a 2005 Toyota Tacoma really easy. One of the main reason why I bought this instead of a Shop Press is because of space. I'm a DIY'er and I currently have a 1 car garage and don't want a big shop press in the garage. Especially when I'm not going to be doing this often, this Hub Puller is small enough to where i can just put it anywhere in the garage when done. Their warranty seems to be pretty good as well. Mine came with one of the legs a little bent. It was still functional and I used it to do the wheel hub job, then I called OTC to get it warranty and they sent me a new leg and I used the same box to ship the slightly bent leg back. The bent leg wasn't due to use, but I think it wasn't formed correctly from the manufacturing process so need not worry about the legs ever bending from use, it's pretty strong. You will also need an impact gun. I actually use the 1/2 electric corded impact gun from HF and it did a good job at removing the hub. Also, as everyone has mentioned, you will also need a 32mm wrench and a 1 inch socket. Grease up the long bolt well and that will prevent premature damage to the bolt. I noticed that when the impact gun was going at it with the 1 inch socket, the socket was getting pretty warm. So definitely use an impact socket and not a regular chrome vanadium socket.
The OTC 6575-1 is specifically designed to apply maximum force with minimal effort from an impact gun to also minimize service time. The jaws are designed and sized to properly fit hub applications and can be quickly located on the puller bar without the use of fasteners. The 3/4" custom drive screw coupled with the special equalizer washer provides smooth operation while the proprietary heat treating extends its life 5-10 times longer than similar designs.
Features
Specifically designed to apply maximum force with minimal effort from an impact gun to also minimize service time
The jaws are designed and sized to properly fit hub applications
Can be quickly located on the puller bar without the use of fasteners
The 3/4" custom drive screw coupled with the special equalizer washer provides smooth operation
The proprietary heat treating extends its life 5-10 times longer than similar designs
Specifications
Manufacturer : OTC Tools
Brand : OTC
Model : 6575-1
Item Weight : 0.186 ounces
Product Dimensions : 17 x 7.5 x 3.75 inches
Item model number : 6575-1
Is Discontinued By Manufacturer : No
Manufacturer Part Number : 6575-1
ASIN : B005PL1PDA
Customer Reviews : 4.7 out of 5 stars 155 ratings 4.7 out of 5 stars
Best Sellers Rank : #135,669 in Automotive (See Top 100 in Automotive) #81 in Puller Sets
Date First Available : September 13, 2011
We are offering a 30-day money-back guarantee!
If you are not satisfied with your purchase within 30 days of receiving the product, you can ship it back to us for a refund or exchange.
Before returning the item, kindly send us a request using the Self-Serve Return option or contact our customer support team to get your return authorization. You may contact us by email at support@mprtools.com, phone at 1-800-905-0410, or chat through our website. We are available Monday to Friday from 8 am to 5 pm ET.
We want to guarantee your experience with us will be outstanding. Here are just a few of the reasons why mprtools.com is the go-to company to get your tools from:
We work very hard to ensure we offer the absolute best prices online. If you find it at a lower price somewhere else within 365 days of purchasing, please message us, and we’ll credit you back the difference right away.
It's our duty to provide superior quality tools you can trust to get the job done. If you're not fully satisfied with your order, you can request a return for a complete reimbursement.
I purchased this puller to remove a John Deere GT245 electric PTO clutch AM126100 without damage. It is perfectly sized for the job and worked amazingly well to remove a clutch that was siezed almost permanently on the engine shaft. It truly is a quality tool.
I used this "Hub Grappler" puller to extract a hub from the front wheel bearing on a Subaru Outback, without having to remove the steering knuckle. This puller did a solid job getting the hub out without any damage and actually made easy work out of it.
The package says "Made in the USA of globally sourced components". I have to say, it's extremely well made. THICK, durable metal, which is coated to prevent rusting. The jaws are remarkably thick and sturdy - I would say professional grade. The forcing bolt and nut are nice and snug, made to high tolerance.
I would recommend putting anti-seize lube on the bolt and nut for longevity.
Great job, OTC!
Works great, very stable. OTC has stepped up by adding this to a great puller set. Wish this had been around sooner.
I usually find pulling the hub out of a wheel bearing is the toughest part of replacing a bearing. I usually use my 20 ton press until I bought this tool
I have used this puller three times so far and it has made pulling the hubs out of the FWD front wheel bearings much easier. I even used that bolt with my bearing puller kit making removing and installing the bearing easier too. Always grease up that bolt!
This OTC 6575 Hub Grappler Puller and the HarborFreight Front Wheel Bearing Adapter made taking out the front wheel hubs for a 2005 Toyota Tacoma really easy. One of the main reason why I bought this instead of a Shop Press is because of space. I'm a DIY'er and I currently have a 1 car garage and don't want a big shop press in the garage. Especially when I'm not going to be doing this often, this Hub Puller is small enough to where i can just put it anywhere in the garage when done. Their warranty seems to be pretty good as well. Mine came with one of the legs a little bent. It was still functional and I used it to do the wheel hub job, then I called OTC to get it warranty and they sent me a new leg and I used the same box to ship the slightly bent leg back. The bent leg wasn't due to use, but I think it wasn't formed correctly from the manufacturing process so need not worry about the legs ever bending from use, it's pretty strong. You will also need an impact gun. I actually use the 1/2 electric corded impact gun from HF and it did a good job at removing the hub. Also, as everyone has mentioned, you will also need a 32mm wrench and a 1 inch socket. Grease up the long bolt well and that will prevent premature damage to the bolt. I noticed that when the impact gun was going at it with the 1 inch socket, the socket was getting pretty warm. So definitely use an impact socket and not a regular chrome vanadium socket.
The OTC 6575-1 is specifically designed to apply maximum force with minimal effort from an impact gun to also minimize service time. The jaws are designed and sized to properly fit hub applications and can be quickly located on the puller bar without the use of fasteners. The 3/4" custom drive screw coupled with the special equalizer washer provides smooth operation while the proprietary heat treating extends its life 5-10 times longer than similar designs.
Features
Specifically designed to apply maximum force with minimal effort from an impact gun to also minimize service time
The jaws are designed and sized to properly fit hub applications
Can be quickly located on the puller bar without the use of fasteners
The 3/4" custom drive screw coupled with the special equalizer washer provides smooth operation
The proprietary heat treating extends its life 5-10 times longer than similar designs
Specifications
Manufacturer : OTC Tools
Brand : OTC
Model : 6575-1
Item Weight : 0.186 ounces
Product Dimensions : 17 x 7.5 x 3.75 inches
Item model number : 6575-1
Is Discontinued By Manufacturer : No
Manufacturer Part Number : 6575-1
ASIN : B005PL1PDA
Customer Reviews : 4.7 out of 5 stars 155 ratings 4.7 out of 5 stars
Best Sellers Rank : #135,669 in Automotive (See Top 100 in Automotive) #81 in Puller Sets
Date First Available : September 13, 2011
We are offering a 30-day money-back guarantee!
If you are not satisfied with your purchase within 30 days of receiving the product, you can ship it back to us for a refund or exchange.
Before returning the item, kindly send us a request using the Self-Serve Return option or contact our customer support team to get your return authorization. You may contact us by email at support@mprtools.com, phone at 1-800-905-0410, or chat through our website. We are available Monday to Friday from 8 am to 5 pm ET.
We want to guarantee your experience with us will be outstanding. Here are just a few of the reasons why mprtools.com is the go-to company to get your tools from:
We work very hard to ensure we offer the absolute best prices online. If you find it at a lower price somewhere else within 365 days of purchasing, please message us, and we’ll credit you back the difference right away.
It's our duty to provide superior quality tools you can trust to get the job done. If you're not fully satisfied with your order, you can request a return for a complete reimbursement.
I purchased this puller to remove a John Deere GT245 electric PTO clutch AM126100 without damage. It is perfectly sized for the job and worked amazingly well to remove a clutch that was siezed almost permanently on the engine shaft. It truly is a quality tool.
I used this "Hub Grappler" puller to extract a hub from the front wheel bearing on a Subaru Outback, without having to remove the steering knuckle. This puller did a solid job getting the hub out without any damage and actually made easy work out of it.
The package says "Made in the USA of globally sourced components". I have to say, it's extremely well made. THICK, durable metal, which is coated to prevent rusting. The jaws are remarkably thick and sturdy - I would say professional grade. The forcing bolt and nut are nice and snug, made to high tolerance.
I would recommend putting anti-seize lube on the bolt and nut for longevity.
Great job, OTC!
Works great, very stable. OTC has stepped up by adding this to a great puller set. Wish this had been around sooner.
I usually find pulling the hub out of a wheel bearing is the toughest part of replacing a bearing. I usually use my 20 ton press until I bought this tool
I have used this puller three times so far and it has made pulling the hubs out of the FWD front wheel bearings much easier. I even used that bolt with my bearing puller kit making removing and installing the bearing easier too. Always grease up that bolt!
This OTC 6575 Hub Grappler Puller and the HarborFreight Front Wheel Bearing Adapter made taking out the front wheel hubs for a 2005 Toyota Tacoma really easy. One of the main reason why I bought this instead of a Shop Press is because of space. I'm a DIY'er and I currently have a 1 car garage and don't want a big shop press in the garage. Especially when I'm not going to be doing this often, this Hub Puller is small enough to where i can just put it anywhere in the garage when done. Their warranty seems to be pretty good as well. Mine came with one of the legs a little bent. It was still functional and I used it to do the wheel hub job, then I called OTC to get it warranty and they sent me a new leg and I used the same box to ship the slightly bent leg back. The bent leg wasn't due to use, but I think it wasn't formed correctly from the manufacturing process so need not worry about the legs ever bending from use, it's pretty strong. You will also need an impact gun. I actually use the 1/2 electric corded impact gun from HF and it did a good job at removing the hub. Also, as everyone has mentioned, you will also need a 32mm wrench and a 1 inch socket. Grease up the long bolt well and that will prevent premature damage to the bolt. I noticed that when the impact gun was going at it with the 1 inch socket, the socket was getting pretty warm. So definitely use an impact socket and not a regular chrome vanadium socket.
Sign up to get the latest guides and special offers sent to your inbox.
1-800-905-0410 (Toll Free)
support@mprtools.com
Opening Hours
Mon - Fri: 8 am - 5 pm ET
Sat & Sun: Closed
Great price and excellent tools.
Works very well and last long