great charger
I received it around 3 days after purchasing
No complaints
Great for model building
Usually ready in 4 hours
Order over the phone? Call us now.
1-800-905-0410Learn more about our Price match policy
Purchased this press to remove the Universal Joints on my 1996 XJ Cherokee. WAY WAY easier than banging on things with the BFH and sockets, plus it's a whole lot easier on the ears! I removed the ancient, rusty caps from my yolk-ears with ease! Be sure to lube the threads before use, and tap the yolk-ears to release tension as you crank. This will be part of my trail kit which never leaves the Jeep from now on! I especially like the fact that you can buy this press without all the ball joint adapters I would never use, but will work with the 4x4/Jeep adapters (sold separately) if I ever decide to try my ball joints! Comes with a sticker on it that says assembled in USA from foreign parts or something confusing like that. Seems pretty solid so far, but I've only ever had to use a 1/2 drive ratchet so who knows if it would hold up to a breaker bar? For U-joints, it definitely makes me very happy!
UPDATE: After about a year now, I've now used this tool to do another set of front-axle u-joints and two sets of driveshaft u-joints on Jeeps and the tool has not bent or given me any problems. I've used a 1/2in drive breaker bar with this press now on some stubborn u-joints and it held up just fine. This tool is the perfect example of how much easier a job can be with the correct, quality tool! With this tool, replacing u-joints can be done by anyone who has two hands and a few wrenches.
This tool is excellent, it made replacing a u-joint possible even under the worst conditions, the quality is great, I reccomend to anyone who replaces their own u-joints, a must have item for the tool box
I am an auto mechanic, and use this tool daily. Very durable, unlike some of the cheap china made ones. It's worth the extra money in durability.
I never use it yet so I can't tell how it works. This is very good product and very practical for do-it yourself mechanic.
I do a lot of car work on the side and had one of these from H.F I was very ruff on it, used an impact to run it, this unit is better made and works just as well, so far I've used it about 50 times with no prob.
OTC's C-Frame Press removes and installs automotive universal joints with needle bearings including GM plastic pin CV U-joints. Tool can also service u-joints found on Dana 60 4WD front drive axles with the addition of an OTC No. 6935 adapter. Handy tool also removes heavy-duty truck brake anchor pins, press in wheel studs, and ball joints on most cars and light trucks with press-fit type ball joints. Removes and installs ball joints without the need to remove the control arm from the vehicle, saving time and money. High-grade materials ensure quality performance over the lifetime of the tool. Value is at the core of the OTC tool and equipment portfolio. For a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether its a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians productivity and shop profits.
Features
OTC's C-Frame Press removes and installs automotive universal joints with needle bearings including GM plastic pin CV U-joints
Can also service u-joints found on Dana 60 4WD front drive axles with the addition of an OTC No. 6935 adapter
Handy tool also removes heavy duty truck brake anchor pins, press in wheel studs, and ball joints on most cars and light trucks with press-fit type ball joints
Removes and installs ball joints without the need to remove the control arm from the vehicle, saving time and money
High-grade materials ensure quality performance over the lifetime of the tool
Specifications
Manufacturer : OTC
Brand : OTC
Item Weight : 0.143 ounces
Product Dimensions : 7.4 x 2 x 11.8 inches
Item model number : 7248
Is Discontinued By Manufacturer : No
Manufacturer Part Number : 7248
Folding : No
ASIN : B000OCFIAQ
Customer Reviews : 4.8 out of 5 stars 127 ratings 4.8 out of 5 stars
Best Sellers Rank : #410,128 in Automotive (See Top 100 in Automotive) #184 in Ball Joint & Tie Rod Tools
Domestic Shipping : Item can be shipped within U.S.
International Shipping : This item can be shipped to select countries outside of the U.S. Learn More
Date First Available : October 2, 2001
We are offering a 30-day money-back guarantee!
If you are not satisfied with your purchase within 30 days of receiving the product, you can ship it back to us for a refund or exchange.
Before returning the item, kindly send us a request using the Self-Serve Return option or contact our customer support team to get your return authorization. You may contact us by email at support@mprtools.com, phone at 1-800-905-0410, or chat through our website. We are available Monday to Friday from 8 am to 5 pm ET.
We want to guarantee your experience with us will be outstanding. Here are just a few of the reasons why mprtools.com is the go-to company to get your tools from:
We work very hard to ensure we offer the absolute best prices online. If you find it at a lower price somewhere else within 365 days of purchasing, please message us, and we’ll credit you back the difference right away.
It's our duty to provide superior quality tools you can trust to get the job done. If you're not fully satisfied with your order, you can request a return for a complete reimbursement.
Purchased this press to remove the Universal Joints on my 1996 XJ Cherokee. WAY WAY easier than banging on things with the BFH and sockets, plus it's a whole lot easier on the ears! I removed the ancient, rusty caps from my yolk-ears with ease! Be sure to lube the threads before use, and tap the yolk-ears to release tension as you crank. This will be part of my trail kit which never leaves the Jeep from now on! I especially like the fact that you can buy this press without all the ball joint adapters I would never use, but will work with the 4x4/Jeep adapters (sold separately) if I ever decide to try my ball joints! Comes with a sticker on it that says assembled in USA from foreign parts or something confusing like that. Seems pretty solid so far, but I've only ever had to use a 1/2 drive ratchet so who knows if it would hold up to a breaker bar? For U-joints, it definitely makes me very happy!
UPDATE: After about a year now, I've now used this tool to do another set of front-axle u-joints and two sets of driveshaft u-joints on Jeeps and the tool has not bent or given me any problems. I've used a 1/2in drive breaker bar with this press now on some stubborn u-joints and it held up just fine. This tool is the perfect example of how much easier a job can be with the correct, quality tool! With this tool, replacing u-joints can be done by anyone who has two hands and a few wrenches.
This tool is excellent, it made replacing a u-joint possible even under the worst conditions, the quality is great, I reccomend to anyone who replaces their own u-joints, a must have item for the tool box
I am an auto mechanic, and use this tool daily. Very durable, unlike some of the cheap china made ones. It's worth the extra money in durability.
I never use it yet so I can't tell how it works. This is very good product and very practical for do-it yourself mechanic.
I do a lot of car work on the side and had one of these from H.F I was very ruff on it, used an impact to run it, this unit is better made and works just as well, so far I've used it about 50 times with no prob.
OTC's C-Frame Press removes and installs automotive universal joints with needle bearings including GM plastic pin CV U-joints. Tool can also service u-joints found on Dana 60 4WD front drive axles with the addition of an OTC No. 6935 adapter. Handy tool also removes heavy-duty truck brake anchor pins, press in wheel studs, and ball joints on most cars and light trucks with press-fit type ball joints. Removes and installs ball joints without the need to remove the control arm from the vehicle, saving time and money. High-grade materials ensure quality performance over the lifetime of the tool. Value is at the core of the OTC tool and equipment portfolio. For a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether its a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians productivity and shop profits.
Features
OTC's C-Frame Press removes and installs automotive universal joints with needle bearings including GM plastic pin CV U-joints
Can also service u-joints found on Dana 60 4WD front drive axles with the addition of an OTC No. 6935 adapter
Handy tool also removes heavy duty truck brake anchor pins, press in wheel studs, and ball joints on most cars and light trucks with press-fit type ball joints
Removes and installs ball joints without the need to remove the control arm from the vehicle, saving time and money
High-grade materials ensure quality performance over the lifetime of the tool
Specifications
Manufacturer : OTC
Brand : OTC
Item Weight : 0.143 ounces
Product Dimensions : 7.4 x 2 x 11.8 inches
Item model number : 7248
Is Discontinued By Manufacturer : No
Manufacturer Part Number : 7248
Folding : No
ASIN : B000OCFIAQ
Customer Reviews : 4.8 out of 5 stars 127 ratings 4.8 out of 5 stars
Best Sellers Rank : #410,128 in Automotive (See Top 100 in Automotive) #184 in Ball Joint & Tie Rod Tools
Domestic Shipping : Item can be shipped within U.S.
International Shipping : This item can be shipped to select countries outside of the U.S. Learn More
Date First Available : October 2, 2001
We are offering a 30-day money-back guarantee!
If you are not satisfied with your purchase within 30 days of receiving the product, you can ship it back to us for a refund or exchange.
Before returning the item, kindly send us a request using the Self-Serve Return option or contact our customer support team to get your return authorization. You may contact us by email at support@mprtools.com, phone at 1-800-905-0410, or chat through our website. We are available Monday to Friday from 8 am to 5 pm ET.
We want to guarantee your experience with us will be outstanding. Here are just a few of the reasons why mprtools.com is the go-to company to get your tools from:
We work very hard to ensure we offer the absolute best prices online. If you find it at a lower price somewhere else within 365 days of purchasing, please message us, and we’ll credit you back the difference right away.
It's our duty to provide superior quality tools you can trust to get the job done. If you're not fully satisfied with your order, you can request a return for a complete reimbursement.
Purchased this press to remove the Universal Joints on my 1996 XJ Cherokee. WAY WAY easier than banging on things with the BFH and sockets, plus it's a whole lot easier on the ears! I removed the ancient, rusty caps from my yolk-ears with ease! Be sure to lube the threads before use, and tap the yolk-ears to release tension as you crank. This will be part of my trail kit which never leaves the Jeep from now on! I especially like the fact that you can buy this press without all the ball joint adapters I would never use, but will work with the 4x4/Jeep adapters (sold separately) if I ever decide to try my ball joints! Comes with a sticker on it that says assembled in USA from foreign parts or something confusing like that. Seems pretty solid so far, but I've only ever had to use a 1/2 drive ratchet so who knows if it would hold up to a breaker bar? For U-joints, it definitely makes me very happy!
UPDATE: After about a year now, I've now used this tool to do another set of front-axle u-joints and two sets of driveshaft u-joints on Jeeps and the tool has not bent or given me any problems. I've used a 1/2in drive breaker bar with this press now on some stubborn u-joints and it held up just fine. This tool is the perfect example of how much easier a job can be with the correct, quality tool! With this tool, replacing u-joints can be done by anyone who has two hands and a few wrenches.
This tool is excellent, it made replacing a u-joint possible even under the worst conditions, the quality is great, I reccomend to anyone who replaces their own u-joints, a must have item for the tool box
I am an auto mechanic, and use this tool daily. Very durable, unlike some of the cheap china made ones. It's worth the extra money in durability.
I never use it yet so I can't tell how it works. This is very good product and very practical for do-it yourself mechanic.
I do a lot of car work on the side and had one of these from H.F I was very ruff on it, used an impact to run it, this unit is better made and works just as well, so far I've used it about 50 times with no prob.
Sign up to get the latest guides and special offers sent to your inbox.
1-800-905-0410 (Toll Free)
support@mprtools.com
Opening Hours
Mon - Fri: 8 am - 5 pm ET
Sat & Sun: Closed
great charger
I received it around 3 days after purchasing
No complaints
Great for model building