great charger
I received it around 3 days after purchasing
No complaints
Great for model building
Usually ready in 4 hours
Order over the phone? Call us now.
1-800-905-0410Learn more about our Price match policy
Works perfect for me bought 1/2 inch use reducers if need even used on rotor screws using reducer to 1/4 socket
This Shake'n Break gets the job done, however the square 3/8 shaft is too short and should be a little bit longer. So it bottoms out inside the female square hole. Instead the hardened tool bottoms out the flat outer surface on extensions. From the impact it mushrooms the female side of the extensions causing it to non usable again.
Prblly a good 50 set screws in and still in good shape. I use this almost explusivly for removing set screws on brake rotors. Perfect to get the impact on the screw and crack it loose in the same motion with a 19mm wrench on the tool. Hasn't let me down yet. Worth the money.
I used it on a large phillips head screw that holds the tailgate onto my 1970 International Scout. I beat on that bolt with an impact driver for two days with every penetrating spray you can think of. I was going to weld a bolt to it but figured that I would give this a try. It worked like a charm and I could not be happier. Every north east old car guy (or girl) should have one of them in the tool box.
Worked like a charm to remove Brake Bleeders on a 16 year old car in the Rust Belt where the bleeders had NEVER been touched!
Was able to flush out the old fluid. Without this I would have had to replace all four calipers!
The Mayhew Tools 37316 Pneumatic Bolt Breaker, 1/2-Inch attaches to an air hammer to provide vibration while removing stubborn/frozen fasteners or torx bolts/nuts. The other end of the bolt breaker features a square drive to be used with impact sockets. Made in the USA. Overall length: 4.785-Inch, body size: 0. 401-Inch, weight: 0. 35-Lb. Includes an unlimited lifetime warranty. Mayhew stands for quality, dependability, and confidence. When the caliber of the tools is just as important as the skills of the professionals employed, businesses trust Mayhew to get the job done. Since 1856, our punches, chisels, and pry bars have been the go-to tools for OEMs and professional mechanics throughout the country. And while our company has grown to meet the needs of the professional market, as well as those of the do-it-yourself automotive enthusiast, our focus has never changed - leveraging our strength to build your business.
Features
Attaches to air hammer to provide vibration while removing stubborn/frozen fasteners or torx bolts/nuts
Standard .401 turn type Parker shank for air guns
Square drive for use with impact sockets
Black oxide finish for additional rust protection
Made in the USA
Specifications
Manufacturer : Mayhew
Part Number : 37316
Item Weight : 0.35 Pounds
Product Dimensions : 4.79 x 0.4 x 0.4 inches
Item model number : 37316
Size : 1/2"
Color : Multi
Material : Alloy Steel
Power Source : Air-Powered
Item Package Quantity : 1
Head Style : Hex
Number of Handles : 1
Measurement System : Inch
Included Components : 1/2-Inch Pneumatic Bolt Breaker
Batteries Included? : No
Batteries Required? : No
Warranty Description : Unlimited Lifetime Warranty
ASIN : B008M23A6Y
Customer Reviews : 4.7 out of 5 stars 614 ratings 4.7 out of 5 stars
Best Sellers Rank : #34,268 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #65 in Power Impact Wrenches
Domestic Shipping : Item can be shipped within U.S.
International Shipping : This item can be shipped to select countries outside of the U.S. Learn More
Date First Available : July 17, 2012
Brand : Mayhew Tools
Item Dimensions LxWxH : 4.79 x 0.4 x 0.4 inches
We are offering a 30-day money-back guarantee!
If you are not satisfied with your purchase within 30 days of receiving the product, you can ship it back to us for a refund or exchange.
Before returning the item, kindly send us a request using the Self-Serve Return option or contact our customer support team to get your return authorization. You may contact us by email at support@mprtools.com, phone at 1-800-905-0410, or chat through our website. We are available Monday to Friday from 8 am to 5 pm ET.
We want to guarantee your experience with us will be outstanding. Here are just a few of the reasons why mprtools.com is the go-to company to get your tools from:
We work very hard to ensure we offer the absolute best prices online. If you find it at a lower price somewhere else within 365 days of purchasing, please message us, and we’ll credit you back the difference right away.
It's our duty to provide superior quality tools you can trust to get the job done. If you're not fully satisfied with your order, you can request a return for a complete reimbursement.
Works perfect for me bought 1/2 inch use reducers if need even used on rotor screws using reducer to 1/4 socket
This Shake'n Break gets the job done, however the square 3/8 shaft is too short and should be a little bit longer. So it bottoms out inside the female square hole. Instead the hardened tool bottoms out the flat outer surface on extensions. From the impact it mushrooms the female side of the extensions causing it to non usable again.
Prblly a good 50 set screws in and still in good shape. I use this almost explusivly for removing set screws on brake rotors. Perfect to get the impact on the screw and crack it loose in the same motion with a 19mm wrench on the tool. Hasn't let me down yet. Worth the money.
I used it on a large phillips head screw that holds the tailgate onto my 1970 International Scout. I beat on that bolt with an impact driver for two days with every penetrating spray you can think of. I was going to weld a bolt to it but figured that I would give this a try. It worked like a charm and I could not be happier. Every north east old car guy (or girl) should have one of them in the tool box.
Worked like a charm to remove Brake Bleeders on a 16 year old car in the Rust Belt where the bleeders had NEVER been touched!
Was able to flush out the old fluid. Without this I would have had to replace all four calipers!
The Mayhew Tools 37316 Pneumatic Bolt Breaker, 1/2-Inch attaches to an air hammer to provide vibration while removing stubborn/frozen fasteners or torx bolts/nuts. The other end of the bolt breaker features a square drive to be used with impact sockets. Made in the USA. Overall length: 4.785-Inch, body size: 0. 401-Inch, weight: 0. 35-Lb. Includes an unlimited lifetime warranty. Mayhew stands for quality, dependability, and confidence. When the caliber of the tools is just as important as the skills of the professionals employed, businesses trust Mayhew to get the job done. Since 1856, our punches, chisels, and pry bars have been the go-to tools for OEMs and professional mechanics throughout the country. And while our company has grown to meet the needs of the professional market, as well as those of the do-it-yourself automotive enthusiast, our focus has never changed - leveraging our strength to build your business.
Features
Attaches to air hammer to provide vibration while removing stubborn/frozen fasteners or torx bolts/nuts
Standard .401 turn type Parker shank for air guns
Square drive for use with impact sockets
Black oxide finish for additional rust protection
Made in the USA
Specifications
Manufacturer : Mayhew
Part Number : 37316
Item Weight : 0.35 Pounds
Product Dimensions : 4.79 x 0.4 x 0.4 inches
Item model number : 37316
Size : 1/2"
Color : Multi
Material : Alloy Steel
Power Source : Air-Powered
Item Package Quantity : 1
Head Style : Hex
Number of Handles : 1
Measurement System : Inch
Included Components : 1/2-Inch Pneumatic Bolt Breaker
Batteries Included? : No
Batteries Required? : No
Warranty Description : Unlimited Lifetime Warranty
ASIN : B008M23A6Y
Customer Reviews : 4.7 out of 5 stars 614 ratings 4.7 out of 5 stars
Best Sellers Rank : #34,268 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #65 in Power Impact Wrenches
Domestic Shipping : Item can be shipped within U.S.
International Shipping : This item can be shipped to select countries outside of the U.S. Learn More
Date First Available : July 17, 2012
Brand : Mayhew Tools
Item Dimensions LxWxH : 4.79 x 0.4 x 0.4 inches
We are offering a 30-day money-back guarantee!
If you are not satisfied with your purchase within 30 days of receiving the product, you can ship it back to us for a refund or exchange.
Before returning the item, kindly send us a request using the Self-Serve Return option or contact our customer support team to get your return authorization. You may contact us by email at support@mprtools.com, phone at 1-800-905-0410, or chat through our website. We are available Monday to Friday from 8 am to 5 pm ET.
We want to guarantee your experience with us will be outstanding. Here are just a few of the reasons why mprtools.com is the go-to company to get your tools from:
We work very hard to ensure we offer the absolute best prices online. If you find it at a lower price somewhere else within 365 days of purchasing, please message us, and we’ll credit you back the difference right away.
It's our duty to provide superior quality tools you can trust to get the job done. If you're not fully satisfied with your order, you can request a return for a complete reimbursement.
Works perfect for me bought 1/2 inch use reducers if need even used on rotor screws using reducer to 1/4 socket
This Shake'n Break gets the job done, however the square 3/8 shaft is too short and should be a little bit longer. So it bottoms out inside the female square hole. Instead the hardened tool bottoms out the flat outer surface on extensions. From the impact it mushrooms the female side of the extensions causing it to non usable again.
Prblly a good 50 set screws in and still in good shape. I use this almost explusivly for removing set screws on brake rotors. Perfect to get the impact on the screw and crack it loose in the same motion with a 19mm wrench on the tool. Hasn't let me down yet. Worth the money.
I used it on a large phillips head screw that holds the tailgate onto my 1970 International Scout. I beat on that bolt with an impact driver for two days with every penetrating spray you can think of. I was going to weld a bolt to it but figured that I would give this a try. It worked like a charm and I could not be happier. Every north east old car guy (or girl) should have one of them in the tool box.
Worked like a charm to remove Brake Bleeders on a 16 year old car in the Rust Belt where the bleeders had NEVER been touched!
Was able to flush out the old fluid. Without this I would have had to replace all four calipers!
Sign up to get the latest guides and special offers sent to your inbox.
1-800-905-0410 (Toll Free)
support@mprtools.com
Opening Hours
Mon - Fri: 8 am - 5 pm ET
Sat & Sun: Closed
great charger
I received it around 3 days after purchasing
No complaints
Great for model building