$30.35 CAD
$37.93 CAD
Irwin Tools 53916 Bolt Extractor, 7/8-Inch / 22mm, 1/2-Inch Drive - MPR Tools & Equipment
Irwin Tools 53916 Bolt Extractor, 7/8-Inch / 22mm, 1/2-Inch Drive - MPR Tools & Equipment

Irwin Tools 53916 Bolt Extractor, 7/8-Inch / 22mm, 1/2-Inch Drive

Brand: Irwin Tools
SKU: IRW-53916
(66)
Sale price
$30.35 CAD
Regular price
$37.93 CAD
You save
$7.58 CAD (20%)

Out of stock!
Get Free
Notify Me When Available

Order over the phone? Call us now.

1-800-905-0410
Found a better price elsewhere? Request Price Match

Customer Reviews

Based on 66 reviews
100%
(66)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Chris Kinlin
Does it's job

I was replacing o2 sensors on my 02 Wrangler. 2 of the 4 were very hard, but the last was stripped to almost rounded. Cut everything down to just the bolt portion, heated the heck out of it and this wrenched it right out. Could not have been happier since I spent so much time trying with other tools.

B
Brumbie WilliamsIII
It'll get it! Worked AWESOME!

Struggled with an oxygen sensor at the exhaust manifold in a bad location for a few months, tried heat, PB Blaster.
It took me longer to figure out how to get the socket up into the space and tap it with the hammer than it did to unseat the remnants of the sensor.

In case you can't get a breaker bar or ratchet in that spot, the outside hex on the socket is about 36mm.

c
chris
Worked like magic

Rounded off an oxygen sensor. Tried everything to get it off.. ended up taking a chisel and breaking it off to put this bad boy on. Tapped it a few good times with a hammer to make sure it was on good. Hooked up a wrench and a breaker bar and took a deep breath and said a little prayer. Then turning the breaker bar this little thing was like magic pulling out the broken o2 sensor. I cannot stress how easy it was to remove it, it truly is magic.

j
jon
Mo fkn life saver, was hesitant at first when ...

Mo fkn life saver, was hesitant at first when i was hammering it on the lug nut... came right out, even used it on a nut that didnt need extracting... for sure going to get another in a different size...

P
Porter Spangler
Really good tool to have in a bad situation.

In removing a wheel on my suburban I found that the lug nuts had been damaged after repeated removal and reinstallation over the years and now could not be removed when I absolutely need to remove some of the lug nuts. I tried several lug nut removal tools without success. Then I discovered Irwin tools. I purchased the 7/8 (22mm) nut removal tool and in an instant the bad lug nut was removed. Everyone that works on their own cars needs to have these nut removal tools in their tool box.

123
FREE TOOL WITH $400+ ORDERS
1-YEAR PRICE MATCH GUARANTEE
FREE SHIPPING WITH $150+ ORDERS
30-DAY MONEY-BACK GUARANTEE

This IRWIN BOLT-GRIP Impact Bolt Extractor is built for maximum durability and long life with impact drivers. The high-carbon steel construction helps ensure long bolt extractor life and great durability. The tenacious reverse spiral flutes are engineered to provide maximum gripping power to easily remove broken, damaged or rusted nuts, bolts and screws.

Features

  • Bolt extractor is built for maximum durability and long life with impact drivers

  • High-carbon steel helps ensure long bolt extractor life and great durability

  • Universal lobular design fits most types of fasteners

  • Reverse spiral flutes are engineered to provide maximum gripping power to easily remove broken, damaged or rusted nuts, bolts and screws

  • Black oxide finish resists corrosion and increases the life of the bolt extractor

Specifications

Manufacturer : Irwin

Part Number : 53916

Item Weight : 0.01 ounces

Product Dimensions : 3.5 x 3 x 1.5 inches

Item model number : 53916

Is Discontinued By Manufacturer : No

Color : Black

Material : Steel

Item Package Quantity : 1

Measurement System : Metric

Included Components : Bolt Grip

Batteries Included? : No

Batteries Required? : No

ASIN : B00270BQ4U

Customer Reviews : 4.7 out of 5 stars 183 ratings 4.7 out of 5 stars

Best Sellers Rank : #141,088 in Patio, Lawn & Garden (See Top 100 in Patio, Lawn & Garden) #319 in Grill Brushes #2,947 in Grilling & BBQ Utensils

Date First Available : November 9, 2004

Shipping

  • We will usually ship your order in 1 to 2 business days! Orders purchased before 2:00 pm EST may be shipped the same day.
  • Your order must have a subtotal of $150 or more to be eligible for free shipping.
  • The delay of your order will depend on your location and from which warehouse your order is shipped from. We will always ship your order from the closest available warehouse. Based on our experience, we estimate the transit time to be between 1 to 3 business days across Canada (excluding NWT, Yukon and Nunavut) and 2 to 5 business days to USA.
  • All orders will be shipped from Canada.
  • You may pick up your order at one of our warehouses, Monday to Friday, from 8 am to 5 pm. Pickup orders are usually ready within 4 hours.

Returns

We are offering a 30-day money-back guarantee!

If you are not satisfied with your purchase within 30 days of receiving the product, you can ship it back to us for a refund or exchange.

Before returning the item, kindly send us a request using the Self-Serve Return option or contact our customer support team to get your return authorization. You may contact us by email at support@mprtools.com, phone at 1-800-905-0410, or chat through our website. We are available Monday to Friday from 8 am to 5 pm ET.

We want to guarantee your experience with us will be outstanding. Here are just a few of the reasons why mprtools.com is the go-to company to get your tools from:

1-Year Price Match Guarantee

We work very hard to ensure we offer the absolute best prices online. If you find it at a lower price somewhere else within 365 days of purchasing, please message us, and we’ll credit you back the difference right away.

30-Day Money-Back Guarantee

It's our duty to provide superior quality tools you can trust to get the job done. If you're not fully satisfied with your order, you can request a return for a complete reimbursement.

Customer Reviews

Based on 66 reviews
100%
(66)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Chris Kinlin
Does it's job

I was replacing o2 sensors on my 02 Wrangler. 2 of the 4 were very hard, but the last was stripped to almost rounded. Cut everything down to just the bolt portion, heated the heck out of it and this wrenched it right out. Could not have been happier since I spent so much time trying with other tools.

B
Brumbie WilliamsIII
It'll get it! Worked AWESOME!

Struggled with an oxygen sensor at the exhaust manifold in a bad location for a few months, tried heat, PB Blaster.
It took me longer to figure out how to get the socket up into the space and tap it with the hammer than it did to unseat the remnants of the sensor.

In case you can't get a breaker bar or ratchet in that spot, the outside hex on the socket is about 36mm.

c
chris
Worked like magic

Rounded off an oxygen sensor. Tried everything to get it off.. ended up taking a chisel and breaking it off to put this bad boy on. Tapped it a few good times with a hammer to make sure it was on good. Hooked up a wrench and a breaker bar and took a deep breath and said a little prayer. Then turning the breaker bar this little thing was like magic pulling out the broken o2 sensor. I cannot stress how easy it was to remove it, it truly is magic.

j
jon
Mo fkn life saver, was hesitant at first when ...

Mo fkn life saver, was hesitant at first when i was hammering it on the lug nut... came right out, even used it on a nut that didnt need extracting... for sure going to get another in a different size...

P
Porter Spangler
Really good tool to have in a bad situation.

In removing a wheel on my suburban I found that the lug nuts had been damaged after repeated removal and reinstallation over the years and now could not be removed when I absolutely need to remove some of the lug nuts. I tried several lug nut removal tools without success. Then I discovered Irwin tools. I purchased the 7/8 (22mm) nut removal tool and in an instant the bad lug nut was removed. Everyone that works on their own cars needs to have these nut removal tools in their tool box.

123
Description

This IRWIN BOLT-GRIP Impact Bolt Extractor is built for maximum durability and long life with impact drivers. The high-carbon steel construction helps ensure long bolt extractor life and great durability. The tenacious reverse spiral flutes are engineered to provide maximum gripping power to easily remove broken, damaged or rusted nuts, bolts and screws.

Features

  • Bolt extractor is built for maximum durability and long life with impact drivers

  • High-carbon steel helps ensure long bolt extractor life and great durability

  • Universal lobular design fits most types of fasteners

  • Reverse spiral flutes are engineered to provide maximum gripping power to easily remove broken, damaged or rusted nuts, bolts and screws

  • Black oxide finish resists corrosion and increases the life of the bolt extractor

Specifications

Manufacturer : Irwin

Part Number : 53916

Item Weight : 0.01 ounces

Product Dimensions : 3.5 x 3 x 1.5 inches

Item model number : 53916

Is Discontinued By Manufacturer : No

Color : Black

Material : Steel

Item Package Quantity : 1

Measurement System : Metric

Included Components : Bolt Grip

Batteries Included? : No

Batteries Required? : No

ASIN : B00270BQ4U

Customer Reviews : 4.7 out of 5 stars 183 ratings 4.7 out of 5 stars

Best Sellers Rank : #141,088 in Patio, Lawn & Garden (See Top 100 in Patio, Lawn & Garden) #319 in Grill Brushes #2,947 in Grilling & BBQ Utensils

Date First Available : November 9, 2004

Shipping & Returns

Shipping

  • We will usually ship your order in 1 to 2 business days! Orders purchased before 2:00 pm EST may be shipped the same day.
  • Your order must have a subtotal of $150 or more to be eligible for free shipping.
  • The delay of your order will depend on your location and from which warehouse your order is shipped from. We will always ship your order from the closest available warehouse. Based on our experience, we estimate the transit time to be between 1 to 3 business days across Canada (excluding NWT, Yukon and Nunavut) and 2 to 5 business days to USA.
  • All orders will be shipped from Canada.
  • You may pick up your order at one of our warehouses, Monday to Friday, from 8 am to 5 pm. Pickup orders are usually ready within 4 hours.

Returns

We are offering a 30-day money-back guarantee!

If you are not satisfied with your purchase within 30 days of receiving the product, you can ship it back to us for a refund or exchange.

Before returning the item, kindly send us a request using the Self-Serve Return option or contact our customer support team to get your return authorization. You may contact us by email at support@mprtools.com, phone at 1-800-905-0410, or chat through our website. We are available Monday to Friday from 8 am to 5 pm ET.

Guarantees

We want to guarantee your experience with us will be outstanding. Here are just a few of the reasons why mprtools.com is the go-to company to get your tools from:

1-Year Price Match Guarantee

We work very hard to ensure we offer the absolute best prices online. If you find it at a lower price somewhere else within 365 days of purchasing, please message us, and we’ll credit you back the difference right away.

30-Day Money-Back Guarantee

It's our duty to provide superior quality tools you can trust to get the job done. If you're not fully satisfied with your order, you can request a return for a complete reimbursement.

Reviews

Customer Reviews

Based on 66 reviews
100%
(66)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Chris Kinlin
Does it's job

I was replacing o2 sensors on my 02 Wrangler. 2 of the 4 were very hard, but the last was stripped to almost rounded. Cut everything down to just the bolt portion, heated the heck out of it and this wrenched it right out. Could not have been happier since I spent so much time trying with other tools.

B
Brumbie WilliamsIII
It'll get it! Worked AWESOME!

Struggled with an oxygen sensor at the exhaust manifold in a bad location for a few months, tried heat, PB Blaster.
It took me longer to figure out how to get the socket up into the space and tap it with the hammer than it did to unseat the remnants of the sensor.

In case you can't get a breaker bar or ratchet in that spot, the outside hex on the socket is about 36mm.

c
chris
Worked like magic

Rounded off an oxygen sensor. Tried everything to get it off.. ended up taking a chisel and breaking it off to put this bad boy on. Tapped it a few good times with a hammer to make sure it was on good. Hooked up a wrench and a breaker bar and took a deep breath and said a little prayer. Then turning the breaker bar this little thing was like magic pulling out the broken o2 sensor. I cannot stress how easy it was to remove it, it truly is magic.

j
jon
Mo fkn life saver, was hesitant at first when ...

Mo fkn life saver, was hesitant at first when i was hammering it on the lug nut... came right out, even used it on a nut that didnt need extracting... for sure going to get another in a different size...

P
Porter Spangler
Really good tool to have in a bad situation.

In removing a wheel on my suburban I found that the lug nuts had been damaged after repeated removal and reinstallation over the years and now could not be removed when I absolutely need to remove some of the lug nuts. I tried several lug nut removal tools without success. Then I discovered Irwin tools. I purchased the 7/8 (22mm) nut removal tool and in an instant the bad lug nut was removed. Everyone that works on their own cars needs to have these nut removal tools in their tool box.

123

You May Also Like

Elevate Your Toolbox.

Sign up to get the latest guides and special offers sent to your inbox.