$26.20 CAD
$32.74 CAD
Irwin 91140 5/8" S&D HSS Fractional 1/2" Reduced Shank Drill Bit - MPR Tools & Equipment
Irwin 91140 5/8" S&D HSS Fractional 1/2" Reduced Shank Drill Bit - MPR Tools & Equipment

Irwin 91140 5/8" S&D HSS Fractional 1/2" Reduced Shank Drill Bit

Brand: Irwin Tools
SKU: IRW-91140
(93)
Sale price
$26.20 CAD
Regular price
$32.74 CAD
You save
$6.54 CAD (20%)

Only 8 left! Usually ships in 24 to 48 hours.
Est. Arrival Nov 22 - Nov 26
Pickup available at Edmonton Warehouse

Usually ready in 4 hours

Check availability at other locations
Get Free

Order over the phone? Call us now.

1-800-905-0410
Found a better price elsewhere? Request Price Match

Customer Reviews

Based on 93 reviews
87%
(81)
13%
(12)
0%
(0)
0%
(0)
0%
(0)
V
Viet Vet
Did what I needed it to do.

I needed to widen 4 7/16" holes through 1/8" steel. The bit accomplished this, though I don't know if it would have done many more. They last hole took a little time, but it did what I need it to do, so that's worth four stars to me. I also used a drill press as I can't imagine doing this with a hand drill (I think that would be difficult with most any bit).

D
Devan Hodge
worked well om metal.

drilled out a bike rack, worded well on that metal.

M
Michelle
Bit was pretty will shot after 21 holes

Used one for drilling solar mounting holes through an asphalt shingle roof. Bit was pretty will shot after 21 holes. Something about drilling through hard granular roofing.

j
jillsy
Quality Bit at Good Price

I needed a bit for cutting two 5/8" holes in 3/8" steel for a farm implement and found this one on Amazon at good price. It performed better than I expected. The IRWIN bit is made of M-7 high speed steel for extended life. It arrived sharp and in its own package for storage. I set the recommended drill speed as close as possible for the 5/8" bit diameter and material (steel) according to the table on my drill press. A pdf version of a table can also be downloaded from IRWIN that includes the bit sharpening angle. The bit moved easily through the 3/8" steel with no chatter or binding using my old drill press with manual belt speed adjustment. For the novice, it may be instructive to read up on the basic rules of drilling metal by searching on-line the words drilling metal etc. Some advance reading can keep one from making mistakes in judgement since the rules for drilling metal can be counterintuitive; such as not using cutting oil for small bits at low rpm; or pressing harder (rather than lighter) to reduce tip heating by generating continuous spiral cuttings rather than chips. For safety, wearing eye protection and mounting the workpiece securely are always musts.

D
Duane Gates
Five Stars

Exactly as described.

123
FREE TOOL WITH $400+ ORDERS
1-YEAR PRICE MATCH GUARANTEE
FREE SHIPPING WITH $150+ ORDERS
30-DAY MONEY-BACK GUARANTEE

5/8" S&D HSS Fractional 1/2" Reduced Shank Drill Bit

Features

  • The bit is constructed of M-7 high-speed steel for high resistance to abrasion during tough drilling applications

  • Three-flatted shank design provides better chuck grip and reduces slippage. Ideal for use in keyless chucks

  • All Silver & Deming bits are 6" long and feature a 1/2" reduced shank that fits all 1/2" drills

  • Standard 118-degree point for use in wood, metal, and plastic

Specifications

Size: 5/8"
Twist Length: 3"
Overall Length: 6"

Shipping

  • We will usually ship your order in 1 to 2 business days! Orders purchased before 2:00 pm EST may be shipped the same day.
  • Your order must have a subtotal of $150 or more to be eligible for free shipping.
  • The delay of your order will depend on your location and from which warehouse your order is shipped from. We will always ship your order from the closest available warehouse. Based on our experience, we estimate the transit time to be between 1 to 3 business days across Canada (excluding NWT, Yukon and Nunavut) and 2 to 5 business days to USA.
  • All orders will be shipped from Canada.
  • You may pick up your order at one of our warehouses, Monday to Friday, from 8 am to 5 pm. Pickup orders are usually ready within 4 hours.

Returns

We are offering a 30-day money-back guarantee!

If you are not satisfied with your purchase within 30 days of receiving the product, you can ship it back to us for a refund or exchange.

Before returning the item, kindly send us a request using the Self-Serve Return option or contact our customer support team to get your return authorization. You may contact us by email at support@mprtools.com, phone at 1-800-905-0410, or chat through our website. We are available Monday to Friday from 8 am to 5 pm ET.

We want to guarantee your experience with us will be outstanding. Here are just a few of the reasons why mprtools.com is the go-to company to get your tools from:

1-Year Price Match Guarantee

We work very hard to ensure we offer the absolute best prices online. If you find it at a lower price somewhere else within 365 days of purchasing, please message us, and we’ll credit you back the difference right away.

30-Day Money-Back Guarantee

It's our duty to provide superior quality tools you can trust to get the job done. If you're not fully satisfied with your order, you can request a return for a complete reimbursement.

Customer Reviews

Based on 93 reviews
87%
(81)
13%
(12)
0%
(0)
0%
(0)
0%
(0)
V
Viet Vet
Did what I needed it to do.

I needed to widen 4 7/16" holes through 1/8" steel. The bit accomplished this, though I don't know if it would have done many more. They last hole took a little time, but it did what I need it to do, so that's worth four stars to me. I also used a drill press as I can't imagine doing this with a hand drill (I think that would be difficult with most any bit).

D
Devan Hodge
worked well om metal.

drilled out a bike rack, worded well on that metal.

M
Michelle
Bit was pretty will shot after 21 holes

Used one for drilling solar mounting holes through an asphalt shingle roof. Bit was pretty will shot after 21 holes. Something about drilling through hard granular roofing.

j
jillsy
Quality Bit at Good Price

I needed a bit for cutting two 5/8" holes in 3/8" steel for a farm implement and found this one on Amazon at good price. It performed better than I expected. The IRWIN bit is made of M-7 high speed steel for extended life. It arrived sharp and in its own package for storage. I set the recommended drill speed as close as possible for the 5/8" bit diameter and material (steel) according to the table on my drill press. A pdf version of a table can also be downloaded from IRWIN that includes the bit sharpening angle. The bit moved easily through the 3/8" steel with no chatter or binding using my old drill press with manual belt speed adjustment. For the novice, it may be instructive to read up on the basic rules of drilling metal by searching on-line the words drilling metal etc. Some advance reading can keep one from making mistakes in judgement since the rules for drilling metal can be counterintuitive; such as not using cutting oil for small bits at low rpm; or pressing harder (rather than lighter) to reduce tip heating by generating continuous spiral cuttings rather than chips. For safety, wearing eye protection and mounting the workpiece securely are always musts.

D
Duane Gates
Five Stars

Exactly as described.

123
Description

5/8" S&D HSS Fractional 1/2" Reduced Shank Drill Bit

Features

  • The bit is constructed of M-7 high-speed steel for high resistance to abrasion during tough drilling applications

  • Three-flatted shank design provides better chuck grip and reduces slippage. Ideal for use in keyless chucks

  • All Silver & Deming bits are 6" long and feature a 1/2" reduced shank that fits all 1/2" drills

  • Standard 118-degree point for use in wood, metal, and plastic

Specifications

Size: 5/8"
Twist Length: 3"
Overall Length: 6"

Shipping & Returns

Shipping

  • We will usually ship your order in 1 to 2 business days! Orders purchased before 2:00 pm EST may be shipped the same day.
  • Your order must have a subtotal of $150 or more to be eligible for free shipping.
  • The delay of your order will depend on your location and from which warehouse your order is shipped from. We will always ship your order from the closest available warehouse. Based on our experience, we estimate the transit time to be between 1 to 3 business days across Canada (excluding NWT, Yukon and Nunavut) and 2 to 5 business days to USA.
  • All orders will be shipped from Canada.
  • You may pick up your order at one of our warehouses, Monday to Friday, from 8 am to 5 pm. Pickup orders are usually ready within 4 hours.

Returns

We are offering a 30-day money-back guarantee!

If you are not satisfied with your purchase within 30 days of receiving the product, you can ship it back to us for a refund or exchange.

Before returning the item, kindly send us a request using the Self-Serve Return option or contact our customer support team to get your return authorization. You may contact us by email at support@mprtools.com, phone at 1-800-905-0410, or chat through our website. We are available Monday to Friday from 8 am to 5 pm ET.

Guarantees

We want to guarantee your experience with us will be outstanding. Here are just a few of the reasons why mprtools.com is the go-to company to get your tools from:

1-Year Price Match Guarantee

We work very hard to ensure we offer the absolute best prices online. If you find it at a lower price somewhere else within 365 days of purchasing, please message us, and we’ll credit you back the difference right away.

30-Day Money-Back Guarantee

It's our duty to provide superior quality tools you can trust to get the job done. If you're not fully satisfied with your order, you can request a return for a complete reimbursement.

Reviews

Customer Reviews

Based on 93 reviews
87%
(81)
13%
(12)
0%
(0)
0%
(0)
0%
(0)
V
Viet Vet
Did what I needed it to do.

I needed to widen 4 7/16" holes through 1/8" steel. The bit accomplished this, though I don't know if it would have done many more. They last hole took a little time, but it did what I need it to do, so that's worth four stars to me. I also used a drill press as I can't imagine doing this with a hand drill (I think that would be difficult with most any bit).

D
Devan Hodge
worked well om metal.

drilled out a bike rack, worded well on that metal.

M
Michelle
Bit was pretty will shot after 21 holes

Used one for drilling solar mounting holes through an asphalt shingle roof. Bit was pretty will shot after 21 holes. Something about drilling through hard granular roofing.

j
jillsy
Quality Bit at Good Price

I needed a bit for cutting two 5/8" holes in 3/8" steel for a farm implement and found this one on Amazon at good price. It performed better than I expected. The IRWIN bit is made of M-7 high speed steel for extended life. It arrived sharp and in its own package for storage. I set the recommended drill speed as close as possible for the 5/8" bit diameter and material (steel) according to the table on my drill press. A pdf version of a table can also be downloaded from IRWIN that includes the bit sharpening angle. The bit moved easily through the 3/8" steel with no chatter or binding using my old drill press with manual belt speed adjustment. For the novice, it may be instructive to read up on the basic rules of drilling metal by searching on-line the words drilling metal etc. Some advance reading can keep one from making mistakes in judgement since the rules for drilling metal can be counterintuitive; such as not using cutting oil for small bits at low rpm; or pressing harder (rather than lighter) to reduce tip heating by generating continuous spiral cuttings rather than chips. For safety, wearing eye protection and mounting the workpiece securely are always musts.

D
Duane Gates
Five Stars

Exactly as described.

123

You May Also Like

Elevate Your Toolbox.

Sign up to get the latest guides and special offers sent to your inbox.