Ingersoll Rand 121Q Super Duty Air Hammer, 121/Q - Tool Only - MPR Tools & Equipment
Ingersoll Rand 121Q Super Duty Air Hammer, 121/Q - Tool Only - MPR Tools & Equipment

Ingersoll Rand 121Q Super Duty Air Hammer, 121/Q - Tool Only

SKU: IRC-121/Q
(61)
Sale price
$201.87 CAD
Regular price
$252.33 CAD
You save
$50.46 CAD (20%)

Only 5 left! Usually ships in 24 to 48 hours.

Frequently Bought Together

Pickup available at Edmonton Warehouse

Usually ready in 4 hours

Check availability at other locations

Order over the phone? Call us now.

1-800-905-0410
Found a better price elsewhere? Request Price Match

Customer Reviews

Based on 61 reviews
75%
(46)
25%
(15)
0%
(0)
0%
(0)
0%
(0)
D
D. Dell
Great for tile removal.

I had to re-tile some bathroom floors, but ran into a problem. The ceramic tile was apparently put down with an adhesive that was meant to last 100 years. In the first bathroom I used a chisel and hammer to remove the tile by hand which took me a week to get the tile up. There had to be a better way so I bought this air hammer and gave it a try.

I was amazed how fast the tile came up with this tool. It works like a little mini hand-held jackhammer. I was able to remove the tile in just a few hours instead of a week doing it by hand. I am sure this handy little tool has many other uses that I may discover later, but for now I am very happy using it for tile removal.

There is one thing you must be aware of. This tool uses an air compressor. I only had a 1 gallon compressor which is not even close to adequate. I had to buy an 8 gallon and it worked great.

D
D. HarmanTop Contributor: Woodworking
Goldilocks of air hammers for home use

First let me say I went on the cheap for my first air hammer and learned my lesson. This unit does all the usual things needed for around the home. Remove tile, chip out grout, punch a hole through concrete or concrete blocks, etc etc. It's not over nor under powered for those uses and it's reasonable weight makes using it easy. It doesn't overly vibrate and isn't overly loud during use. It works perfectly with my 


Makita MAC2400 Big Bore 2.5 HP Air Compressor




 with no real wait time for compressor recharge time beyond the normal pauses for clearing debris or moving about.

It seems about "just right" for typical home owner use.

UPDATE: After a year of use this hammer is still going strong. used it on an outdoor flagstone patio re-grout. (One of those jobs that looked straightforward but turned into a nightmare) It's spent many many hours removing grout, breaking up decaying concrete base and never once even stuttered. It did break a retaining spring but that's to be expected. One of those few tools that is solidly made and worth the money.

J
JR
ingersoll rand air 121k6 hammer

The IR air hammer did everything I expected. I used it to remove the ceramic tile and concrete board from about 90 sq ft of kitchen counter top. If I never use it again, it has paid for itself. My only complaint: the directions that come with the tool are somewhat sparse.

t
thecarpro
typical IR performance

Works very well, just as all IR tools do. Thats all I ever buy when it comes to air tools. Unfortuneatly its not made in the USA anymore. But then again alot of MAC, Snap On tools arent either.

S
SIR Spends A Lot
Magic Wand? Tile Destroyer? Friend?

Nice case and presentation when I opened the lid. I was a little annoyed it didn't come with a nipple (like most air tools you buy). I had to snag one off my brad nailer, but the ad didn't say it had one so I can't complain too much about it. I have a foyer that seems that some >>>> poured cement then placed slate on top of it and bought the most back room dollar a yard tile before I bought the house. Literally 1 inch of concrete. A sledge hammer just chipped up and made a mess of the tiles, this little beauty had many uses. I used every bit today. some to remove grout, some to remove the tile. Worked great at 90PSI This was the same price as renting a hammer drill for 2 days so totally worth the purchase. Too bad my project is done... but amazing it made an all day job a 2 hour snap. Now to remove a concrete slab..

123

FREE TOOL WITH $400+ ORDER

1-YEAR PRICE MATCH GUARANTEE

FREE SHIPPING ON $150+ ORDER

30-DAY MONEY-BACK GUARANTEE

The Ingersoll Rand Super Duty Air Hammer provides a professional touch trigger for total control. This air hammer makes fast work of body panel crimping and cutting, bushing driving, shearing and general front end work. The tough, one-piece alloy barrel provides long life. Easy to maintain, it includes "easy out" throttle valve assembly. This super duty tool produces up to 3,000 blows per minute. It is backed by Ingersoll Rand's 1-year limited warranty.

Features

  • 3000 blows per minute

  • Tough 1-piece alloy barrel

  • Tough, one-piece alloy barrel provides long life; produces up to 3,000 blows per minute

  • Easy-to-maintain; includes "easy out" throttle valve assembly

  • 1-year limited manufacturer's warranty

Specifications

Manufacturer : Ingersoll-Rand

Part Number : 121Q

Item Weight : 3.5 Pounds

Product Dimensions : 15.8 x 2.8 x 7.3 inches

Item model number : 121Q

Is Discontinued By Manufacturer : No

Size : 121/Q - Tool Only

Style : 121/Q - Tool Only

Material : Other

Power Source : Air Powered

Voltage : 0.01 Volts

Item Package Quantity : 1

Included Components : Bare-tool

Batteries Included? : No

Batteries Required? : No

Warranty Description : 1 year parts and labor with sales receipt or invoice

ASIN : B00004XOT4

Customer Reviews : 4.2 out of 5 stars 153 ratings 4.2 out of 5 stars

Best Sellers Rank : #164,679 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #127 in Power Hammer Drills

Domestic Shipping : Item can be shipped within U.S.

International Shipping : This item can be shipped to select countries outside of the U.S. Learn More

Date First Available : April 27, 2006

Brand : Ingersoll Rand

Item Dimensions LxWxH : 15.8 x 2.8 x 7.3 inches

Shipping

  • We will usually ship your order in 1 to 2 business days! Orders purchased before 2:00 pm EST may be shipped the same day.

  • Your order must have a subtotal of $150 or more to be eligible for free shipping.

  • The delay of your order will depend on your location and from which warehouse your order is shipped from. We will always ship your order from the closest available warehouse. Based on our experience, we estimate the transit time to be between 1 to 3 business days across Canada (excluding NWT, Yukon and Nunavut) and 2 to 5 business days to USA.

  • All orders will be shipped from Canada.

  • You may pick up your order at one of our warehouses, Monday to Friday, from 8 am to 5 pm. Pickup orders are usually ready within 4 hours.

Returns

We are offering a 30-day money-back guarantee!

If you are not satisfied with your purchase within 30 days of receiving the product, you can ship it back to us for a refund or exchange.

Before returning the item, kindly send us a request using the Self-Serve Return option or contact our customer support team to get your return authorization. You may contact us by email at support@mprtools.com, phone at 1-800-905-0410, or chat through our website. We are available Monday to Friday from 8 am to 5 pm ET.

We want to guarantee your experience with us will be outstanding. Here are just a few of the reasons why mprtools.com is the go-to company to get your tools from:

1-Year Price Match Guarantee

We work very hard to ensure we offer the absolute best prices online. If you find it at a lower price somewhere else within 365 days of purchasing, please message us, and we’ll credit you back the difference right away.

30-Day Money-Back Guarantee

It's our duty to provide superior quality tools you can trust to get the job done. If you're not fully satisfied with your order, you can request a return for a complete reimbursement.

Customer Reviews

Based on 61 reviews
75%
(46)
25%
(15)
0%
(0)
0%
(0)
0%
(0)
D
D. Dell
Great for tile removal.

I had to re-tile some bathroom floors, but ran into a problem. The ceramic tile was apparently put down with an adhesive that was meant to last 100 years. In the first bathroom I used a chisel and hammer to remove the tile by hand which took me a week to get the tile up. There had to be a better way so I bought this air hammer and gave it a try.

I was amazed how fast the tile came up with this tool. It works like a little mini hand-held jackhammer. I was able to remove the tile in just a few hours instead of a week doing it by hand. I am sure this handy little tool has many other uses that I may discover later, but for now I am very happy using it for tile removal.

There is one thing you must be aware of. This tool uses an air compressor. I only had a 1 gallon compressor which is not even close to adequate. I had to buy an 8 gallon and it worked great.

D
D. HarmanTop Contributor: Woodworking
Goldilocks of air hammers for home use

First let me say I went on the cheap for my first air hammer and learned my lesson. This unit does all the usual things needed for around the home. Remove tile, chip out grout, punch a hole through concrete or concrete blocks, etc etc. It's not over nor under powered for those uses and it's reasonable weight makes using it easy. It doesn't overly vibrate and isn't overly loud during use. It works perfectly with my 


Makita MAC2400 Big Bore 2.5 HP Air Compressor




 with no real wait time for compressor recharge time beyond the normal pauses for clearing debris or moving about.

It seems about "just right" for typical home owner use.

UPDATE: After a year of use this hammer is still going strong. used it on an outdoor flagstone patio re-grout. (One of those jobs that looked straightforward but turned into a nightmare) It's spent many many hours removing grout, breaking up decaying concrete base and never once even stuttered. It did break a retaining spring but that's to be expected. One of those few tools that is solidly made and worth the money.

J
JR
ingersoll rand air 121k6 hammer

The IR air hammer did everything I expected. I used it to remove the ceramic tile and concrete board from about 90 sq ft of kitchen counter top. If I never use it again, it has paid for itself. My only complaint: the directions that come with the tool are somewhat sparse.

t
thecarpro
typical IR performance

Works very well, just as all IR tools do. Thats all I ever buy when it comes to air tools. Unfortuneatly its not made in the USA anymore. But then again alot of MAC, Snap On tools arent either.

S
SIR Spends A Lot
Magic Wand? Tile Destroyer? Friend?

Nice case and presentation when I opened the lid. I was a little annoyed it didn't come with a nipple (like most air tools you buy). I had to snag one off my brad nailer, but the ad didn't say it had one so I can't complain too much about it. I have a foyer that seems that some >>>> poured cement then placed slate on top of it and bought the most back room dollar a yard tile before I bought the house. Literally 1 inch of concrete. A sledge hammer just chipped up and made a mess of the tiles, this little beauty had many uses. I used every bit today. some to remove grout, some to remove the tile. Worked great at 90PSI This was the same price as renting a hammer drill for 2 days so totally worth the purchase. Too bad my project is done... but amazing it made an all day job a 2 hour snap. Now to remove a concrete slab..

123
Description

The Ingersoll Rand Super Duty Air Hammer provides a professional touch trigger for total control. This air hammer makes fast work of body panel crimping and cutting, bushing driving, shearing and general front end work. The tough, one-piece alloy barrel provides long life. Easy to maintain, it includes "easy out" throttle valve assembly. This super duty tool produces up to 3,000 blows per minute. It is backed by Ingersoll Rand's 1-year limited warranty.

Features

  • 3000 blows per minute

  • Tough 1-piece alloy barrel

  • Tough, one-piece alloy barrel provides long life; produces up to 3,000 blows per minute

  • Easy-to-maintain; includes "easy out" throttle valve assembly

  • 1-year limited manufacturer's warranty

Specifications

Manufacturer : Ingersoll-Rand

Part Number : 121Q

Item Weight : 3.5 Pounds

Product Dimensions : 15.8 x 2.8 x 7.3 inches

Item model number : 121Q

Is Discontinued By Manufacturer : No

Size : 121/Q - Tool Only

Style : 121/Q - Tool Only

Material : Other

Power Source : Air Powered

Voltage : 0.01 Volts

Item Package Quantity : 1

Included Components : Bare-tool

Batteries Included? : No

Batteries Required? : No

Warranty Description : 1 year parts and labor with sales receipt or invoice

ASIN : B00004XOT4

Customer Reviews : 4.2 out of 5 stars 153 ratings 4.2 out of 5 stars

Best Sellers Rank : #164,679 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #127 in Power Hammer Drills

Domestic Shipping : Item can be shipped within U.S.

International Shipping : This item can be shipped to select countries outside of the U.S. Learn More

Date First Available : April 27, 2006

Brand : Ingersoll Rand

Item Dimensions LxWxH : 15.8 x 2.8 x 7.3 inches

Shipping & Returns

Shipping

  • We will usually ship your order in 1 to 2 business days! Orders purchased before 2:00 pm EST may be shipped the same day.

  • Your order must have a subtotal of $150 or more to be eligible for free shipping.

  • The delay of your order will depend on your location and from which warehouse your order is shipped from. We will always ship your order from the closest available warehouse. Based on our experience, we estimate the transit time to be between 1 to 3 business days across Canada (excluding NWT, Yukon and Nunavut) and 2 to 5 business days to USA.

  • All orders will be shipped from Canada.

  • You may pick up your order at one of our warehouses, Monday to Friday, from 8 am to 5 pm. Pickup orders are usually ready within 4 hours.

Returns

We are offering a 30-day money-back guarantee!

If you are not satisfied with your purchase within 30 days of receiving the product, you can ship it back to us for a refund or exchange.

Before returning the item, kindly send us a request using the Self-Serve Return option or contact our customer support team to get your return authorization. You may contact us by email at support@mprtools.com, phone at 1-800-905-0410, or chat through our website. We are available Monday to Friday from 8 am to 5 pm ET.

Guarantees

We want to guarantee your experience with us will be outstanding. Here are just a few of the reasons why mprtools.com is the go-to company to get your tools from:

1-Year Price Match Guarantee

We work very hard to ensure we offer the absolute best prices online. If you find it at a lower price somewhere else within 365 days of purchasing, please message us, and we’ll credit you back the difference right away.

30-Day Money-Back Guarantee

It's our duty to provide superior quality tools you can trust to get the job done. If you're not fully satisfied with your order, you can request a return for a complete reimbursement.

Reviews

Customer Reviews

Based on 61 reviews
75%
(46)
25%
(15)
0%
(0)
0%
(0)
0%
(0)
D
D. Dell
Great for tile removal.

I had to re-tile some bathroom floors, but ran into a problem. The ceramic tile was apparently put down with an adhesive that was meant to last 100 years. In the first bathroom I used a chisel and hammer to remove the tile by hand which took me a week to get the tile up. There had to be a better way so I bought this air hammer and gave it a try.

I was amazed how fast the tile came up with this tool. It works like a little mini hand-held jackhammer. I was able to remove the tile in just a few hours instead of a week doing it by hand. I am sure this handy little tool has many other uses that I may discover later, but for now I am very happy using it for tile removal.

There is one thing you must be aware of. This tool uses an air compressor. I only had a 1 gallon compressor which is not even close to adequate. I had to buy an 8 gallon and it worked great.

D
D. HarmanTop Contributor: Woodworking
Goldilocks of air hammers for home use

First let me say I went on the cheap for my first air hammer and learned my lesson. This unit does all the usual things needed for around the home. Remove tile, chip out grout, punch a hole through concrete or concrete blocks, etc etc. It's not over nor under powered for those uses and it's reasonable weight makes using it easy. It doesn't overly vibrate and isn't overly loud during use. It works perfectly with my 


Makita MAC2400 Big Bore 2.5 HP Air Compressor




 with no real wait time for compressor recharge time beyond the normal pauses for clearing debris or moving about.

It seems about "just right" for typical home owner use.

UPDATE: After a year of use this hammer is still going strong. used it on an outdoor flagstone patio re-grout. (One of those jobs that looked straightforward but turned into a nightmare) It's spent many many hours removing grout, breaking up decaying concrete base and never once even stuttered. It did break a retaining spring but that's to be expected. One of those few tools that is solidly made and worth the money.

J
JR
ingersoll rand air 121k6 hammer

The IR air hammer did everything I expected. I used it to remove the ceramic tile and concrete board from about 90 sq ft of kitchen counter top. If I never use it again, it has paid for itself. My only complaint: the directions that come with the tool are somewhat sparse.

t
thecarpro
typical IR performance

Works very well, just as all IR tools do. Thats all I ever buy when it comes to air tools. Unfortuneatly its not made in the USA anymore. But then again alot of MAC, Snap On tools arent either.

S
SIR Spends A Lot
Magic Wand? Tile Destroyer? Friend?

Nice case and presentation when I opened the lid. I was a little annoyed it didn't come with a nipple (like most air tools you buy). I had to snag one off my brad nailer, but the ad didn't say it had one so I can't complain too much about it. I have a foyer that seems that some >>>> poured cement then placed slate on top of it and bought the most back room dollar a yard tile before I bought the house. Literally 1 inch of concrete. A sledge hammer just chipped up and made a mess of the tiles, this little beauty had many uses. I used every bit today. some to remove grout, some to remove the tile. Worked great at 90PSI This was the same price as renting a hammer drill for 2 days so totally worth the purchase. Too bad my project is done... but amazing it made an all day job a 2 hour snap. Now to remove a concrete slab..

123

You May Also Like

Elevate Your Toolbox.

Sign up to get the latest guides and special offers sent to your inbox.