$76.73 CAD
$95.92 CAD
ATD Tools 7443 Design Model 3 Ton Jack Stands - MPR Tools & Equipment
ATD Tools 7443 Design Model 3 Ton Jack Stands - MPR Tools & Equipment

ATD Tools 7443 Design Model 3 Ton Jack Stands

Brand: ATD Tools
SKU: ATD-7443
(5)
Sale price
$76.73 CAD
Regular price
$95.92 CAD
You save
$19.19 CAD (21%)

Out of stock!
Get Free
Notify Me When Available

Order over the phone? Call us now.

1-800-905-0410
Found a better price elsewhere? Request Price Match

Customer Reviews

Based on 5 reviews
60%
(3)
40%
(2)
0%
(0)
0%
(0)
0%
(0)
A
Angeline Salas
Solid stands, not commercial IMO but certainly good enough for the shadetree mechanic

I bought these because I was doing work on my van (Odyssey) that couldn't be accomplished while on a jack or ramps. These are fairly heavy pieces and I don't question their ability to hold the vehicle. So far I've used them 3 times since purchase and they're solid.
Are they beautiful heirloom tools like some of the ones 3-5x their price? No.
Are they something that will outlast me? Probably.
Are they worth the modest price? Definitely.

S
Steve
Good, Inexpensive, Beware of Narrow Top

As others have said, this seems like a good, durable, inexpensive set of jack stands.

The only thing I would note is the very top of the jackstand. I've used others that have more of a flat top, which I prefer. These stands have a notch that fits the rim on the bottom of your car where most people place jackstands during use. If that sounds confusing, just look under your car, or in your car's owner's manual for directions on where to place jackstands. You'll see what I'm referring to.

What I dislike with this product, however, is not the notch itself, but the way the rest of the top angles up and away from the notch, like a big "V". On my car, this is a problem. Because of the sharp angle of the top of this jack, it hits a cross bar before the rim of my car is fully seated in the notch of the jack. As a result, I have to place the jack a little more towards the middle of the car than I would like. Not a big deal, but if the jack had a more flat top, this wouldn't be a problem.

V
Ville Koskela
Amazing Value

I've purchased two sets of these now so I can get the entire car off the ground. For $34 you just can't do any better. The construction of the jacks is solid and the lift range (up to 17") is unbeatable at this price. The only two things I would watch out for are:

1) The black paint tends to chip off as the jack is moved through the stand and "clicks" against the lock. I imagine as the paint comes off the jacks will be more prone to rust, so just keep them dry.

2) The edges at the bottom of the stand are somewhat sharp which means the pressure from the car is concentrated in a smaller area. If you're working with a heavy car on softer ground (eg. asphalt) you may leave an imprint. I would recommend placing the jack stand on a solid surface such as a piece of plywood to prevent any damage to your driveway.

Overall, great product, Amazon price, and as always free shipping!

J
J. Krog
Great, Just as expected!

Not much to say, really: These stands are sturdy, well built, and just as advertised.

C
Colonel
very good!!

I should it buy them long time ago,they sit perfect in my Tacoma , very light and easy to use for light repairs .

FREE TOOL WITH $400+ ORDERS
1-YEAR PRICE MATCH GUARANTEE
FREE SHIPPING WITH $150+ ORDERS
30-DAY MONEY-BACK GUARANTEE

Welded steel construction for superior safety and strength. Sold only in pairs. Ratchet-type jack. Meets ASME/ANSI-PALD Safety Standards.

Features

  • Min-Max Lift: 11-1/2" - 17".

Specifications

Manufacturer : ATD

Brand : ATD

Item Weight : 8.62 pounds

Product Dimensions : 12.2 x 8.5 x 4.2 inches

Item model number : ATD-7443

Is Discontinued By Manufacturer : No

Exterior : Smooth

Manufacturer Part Number : ATD-7443

Folding : No

ASIN : B000OUZWRW

Customer Reviews : 3.6 out of 5 stars 9 ratings 3.6 out of 5 stars

Best Sellers Rank : #1,022,933 in Automotive (See Top 100 in Automotive) #386 in Jack Stands

Date First Available : March 20, 2007

Shipping

  • We will usually ship your order in 1 to 2 business days! Orders purchased before 2:00 pm EST may be shipped the same day.
  • Your order must have a subtotal of $150 or more to be eligible for free shipping.
  • The delay of your order will depend on your location and from which warehouse your order is shipped from. We will always ship your order from the closest available warehouse. Based on our experience, we estimate the transit time to be between 1 to 3 business days across Canada (excluding NWT, Yukon and Nunavut) and 2 to 5 business days to USA.
  • All orders will be shipped from Canada.
  • You may pick up your order at one of our warehouses, Monday to Friday, from 8 am to 5 pm. Pickup orders are usually ready within 4 hours.

Returns

We are offering a 30-day money-back guarantee!

If you are not satisfied with your purchase within 30 days of receiving the product, you can ship it back to us for a refund or exchange.

Before returning the item, kindly send us a request using the Self-Serve Return option or contact our customer support team to get your return authorization. You may contact us by email at support@mprtools.com, phone at 1-800-905-0410, or chat through our website. We are available Monday to Friday from 8 am to 5 pm ET.

We want to guarantee your experience with us will be outstanding. Here are just a few of the reasons why mprtools.com is the go-to company to get your tools from:

1-Year Price Match Guarantee

We work very hard to ensure we offer the absolute best prices online. If you find it at a lower price somewhere else within 365 days of purchasing, please message us, and we’ll credit you back the difference right away.

30-Day Money-Back Guarantee

It's our duty to provide superior quality tools you can trust to get the job done. If you're not fully satisfied with your order, you can request a return for a complete reimbursement.

Customer Reviews

Based on 5 reviews
60%
(3)
40%
(2)
0%
(0)
0%
(0)
0%
(0)
A
Angeline Salas
Solid stands, not commercial IMO but certainly good enough for the shadetree mechanic

I bought these because I was doing work on my van (Odyssey) that couldn't be accomplished while on a jack or ramps. These are fairly heavy pieces and I don't question their ability to hold the vehicle. So far I've used them 3 times since purchase and they're solid.
Are they beautiful heirloom tools like some of the ones 3-5x their price? No.
Are they something that will outlast me? Probably.
Are they worth the modest price? Definitely.

S
Steve
Good, Inexpensive, Beware of Narrow Top

As others have said, this seems like a good, durable, inexpensive set of jack stands.

The only thing I would note is the very top of the jackstand. I've used others that have more of a flat top, which I prefer. These stands have a notch that fits the rim on the bottom of your car where most people place jackstands during use. If that sounds confusing, just look under your car, or in your car's owner's manual for directions on where to place jackstands. You'll see what I'm referring to.

What I dislike with this product, however, is not the notch itself, but the way the rest of the top angles up and away from the notch, like a big "V". On my car, this is a problem. Because of the sharp angle of the top of this jack, it hits a cross bar before the rim of my car is fully seated in the notch of the jack. As a result, I have to place the jack a little more towards the middle of the car than I would like. Not a big deal, but if the jack had a more flat top, this wouldn't be a problem.

V
Ville Koskela
Amazing Value

I've purchased two sets of these now so I can get the entire car off the ground. For $34 you just can't do any better. The construction of the jacks is solid and the lift range (up to 17") is unbeatable at this price. The only two things I would watch out for are:

1) The black paint tends to chip off as the jack is moved through the stand and "clicks" against the lock. I imagine as the paint comes off the jacks will be more prone to rust, so just keep them dry.

2) The edges at the bottom of the stand are somewhat sharp which means the pressure from the car is concentrated in a smaller area. If you're working with a heavy car on softer ground (eg. asphalt) you may leave an imprint. I would recommend placing the jack stand on a solid surface such as a piece of plywood to prevent any damage to your driveway.

Overall, great product, Amazon price, and as always free shipping!

J
J. Krog
Great, Just as expected!

Not much to say, really: These stands are sturdy, well built, and just as advertised.

C
Colonel
very good!!

I should it buy them long time ago,they sit perfect in my Tacoma , very light and easy to use for light repairs .

Description

Welded steel construction for superior safety and strength. Sold only in pairs. Ratchet-type jack. Meets ASME/ANSI-PALD Safety Standards.

Features

  • Min-Max Lift: 11-1/2" - 17".

Specifications

Manufacturer : ATD

Brand : ATD

Item Weight : 8.62 pounds

Product Dimensions : 12.2 x 8.5 x 4.2 inches

Item model number : ATD-7443

Is Discontinued By Manufacturer : No

Exterior : Smooth

Manufacturer Part Number : ATD-7443

Folding : No

ASIN : B000OUZWRW

Customer Reviews : 3.6 out of 5 stars 9 ratings 3.6 out of 5 stars

Best Sellers Rank : #1,022,933 in Automotive (See Top 100 in Automotive) #386 in Jack Stands

Date First Available : March 20, 2007

Shipping & Returns

Shipping

  • We will usually ship your order in 1 to 2 business days! Orders purchased before 2:00 pm EST may be shipped the same day.
  • Your order must have a subtotal of $150 or more to be eligible for free shipping.
  • The delay of your order will depend on your location and from which warehouse your order is shipped from. We will always ship your order from the closest available warehouse. Based on our experience, we estimate the transit time to be between 1 to 3 business days across Canada (excluding NWT, Yukon and Nunavut) and 2 to 5 business days to USA.
  • All orders will be shipped from Canada.
  • You may pick up your order at one of our warehouses, Monday to Friday, from 8 am to 5 pm. Pickup orders are usually ready within 4 hours.

Returns

We are offering a 30-day money-back guarantee!

If you are not satisfied with your purchase within 30 days of receiving the product, you can ship it back to us for a refund or exchange.

Before returning the item, kindly send us a request using the Self-Serve Return option or contact our customer support team to get your return authorization. You may contact us by email at support@mprtools.com, phone at 1-800-905-0410, or chat through our website. We are available Monday to Friday from 8 am to 5 pm ET.

Guarantees

We want to guarantee your experience with us will be outstanding. Here are just a few of the reasons why mprtools.com is the go-to company to get your tools from:

1-Year Price Match Guarantee

We work very hard to ensure we offer the absolute best prices online. If you find it at a lower price somewhere else within 365 days of purchasing, please message us, and we’ll credit you back the difference right away.

30-Day Money-Back Guarantee

It's our duty to provide superior quality tools you can trust to get the job done. If you're not fully satisfied with your order, you can request a return for a complete reimbursement.

Reviews

Customer Reviews

Based on 5 reviews
60%
(3)
40%
(2)
0%
(0)
0%
(0)
0%
(0)
A
Angeline Salas
Solid stands, not commercial IMO but certainly good enough for the shadetree mechanic

I bought these because I was doing work on my van (Odyssey) that couldn't be accomplished while on a jack or ramps. These are fairly heavy pieces and I don't question their ability to hold the vehicle. So far I've used them 3 times since purchase and they're solid.
Are they beautiful heirloom tools like some of the ones 3-5x their price? No.
Are they something that will outlast me? Probably.
Are they worth the modest price? Definitely.

S
Steve
Good, Inexpensive, Beware of Narrow Top

As others have said, this seems like a good, durable, inexpensive set of jack stands.

The only thing I would note is the very top of the jackstand. I've used others that have more of a flat top, which I prefer. These stands have a notch that fits the rim on the bottom of your car where most people place jackstands during use. If that sounds confusing, just look under your car, or in your car's owner's manual for directions on where to place jackstands. You'll see what I'm referring to.

What I dislike with this product, however, is not the notch itself, but the way the rest of the top angles up and away from the notch, like a big "V". On my car, this is a problem. Because of the sharp angle of the top of this jack, it hits a cross bar before the rim of my car is fully seated in the notch of the jack. As a result, I have to place the jack a little more towards the middle of the car than I would like. Not a big deal, but if the jack had a more flat top, this wouldn't be a problem.

V
Ville Koskela
Amazing Value

I've purchased two sets of these now so I can get the entire car off the ground. For $34 you just can't do any better. The construction of the jacks is solid and the lift range (up to 17") is unbeatable at this price. The only two things I would watch out for are:

1) The black paint tends to chip off as the jack is moved through the stand and "clicks" against the lock. I imagine as the paint comes off the jacks will be more prone to rust, so just keep them dry.

2) The edges at the bottom of the stand are somewhat sharp which means the pressure from the car is concentrated in a smaller area. If you're working with a heavy car on softer ground (eg. asphalt) you may leave an imprint. I would recommend placing the jack stand on a solid surface such as a piece of plywood to prevent any damage to your driveway.

Overall, great product, Amazon price, and as always free shipping!

J
J. Krog
Great, Just as expected!

Not much to say, really: These stands are sturdy, well built, and just as advertised.

C
Colonel
very good!!

I should it buy them long time ago,they sit perfect in my Tacoma , very light and easy to use for light repairs .

You May Also Like

Elevate Your Toolbox.

Sign up to get the latest guides and special offers sent to your inbox.