great charger
I received it around 3 days after purchasing
No complaints
Great for model building
Order over the phone? Call us now.
1-800-905-0410Learn more about our Price match policy
Parfait produit. Meilleur prix sur Amazon que chez notre fournisseur habituel. Le certificat de calibration est conforme à nos besoins.
We use these screwdrivers in a production environment. They last about a year, but by the time we are done with them the insides are caked with zinc dust and grease and the outsides look like they have been beaten with a chain flail. These are the best of all the many models that we have tried. Plus from amazon they are about half the price you would pay from Grainger or Mcmaster.
When considering this tool to purchase - it should be noted that when you are using a tool 24 hours on all shifts (sounds like 24x7) - you also are probably using it more than just once each hour.
Once each hour would result in a 5,000 use cycle occurring every 208 days. However, in a busy industrial environment - using this tool just twice each hour - results in 5000 cycles every 104 days. Essentially - every 90 days. You also have the fact that using any torque wrench in the upper or lower ends - decreases the life of said wrench. All of this information is readily available from CDI. The following are quotes from them as to the care of their tools and torque wrenches in general:
"To determine which torque wrench capacity is best suited for an application, many factors must be considered. However, as a recommendation, use a torque wrench in the middle 50% of the overall capacity of the tool. This will result in longer tool life, ease of use for the operator and increased accuracy from "clicker" type torque wrenches
Torque wrenches should be "exercised" a minimum of three times at 100% of full scale before use
Torque wrenches will last longer if reasonable care is taken. Always unwind handle to the lowest setting after each use. Do not attempt to lubricate the internal torque mechanism. Clean torque wrench by wiping, do not immerse. The wrench should be sent to a qualified calibration lab once every year or every 5000 cycles for re-calibration"
The instructions for this specific micro adjustable torque screwdriver (401sm) - state to have it calibrated and gone through every 5,000 cycles - or one year - whichever comes first. ALL torque wrenches have useful life cycles. CDI is at least being honest - and putting in print - the life cycle and service requirements.
If you use this tool only 3 times each hour - at various settings - you should have it serviced every 69 days minimum. This is just part of the cost of doing business and quality work.
I have owned this tool for quite a number of years (just purchasing another one); and find it extremely adequate for small screws, and misc. fasteners without a lot of mass - which require a torque value; etc. With a very long life span. Easy to grip, very visible (bright blue), and easy to use. An excellent tool with excellent cditorque com support.
I bought this torque driver to do work on my guns. In this job precision is a must. The driver comes with a calibration chart to show its accuracy. It is very easy to adjust from one torque setting to the next and has a very audible click when proper torque is reached. It has a metal body so there's a good weight to it in your hand and it has an easy to read window and bar line for the scale. This tool is made for Snap-On, and anybody that knows tools knows that Snap-On is some of the best with very high standard requirements even for their contracted tools. I would recommend this tool to my friends anytime.
Perfect for small projects. Accurate and repeatable results. Very well built and easy to adjust. You will be surprised at how convenient this torque wrench is.
Adjustable models offer versatility for applications that require more than one torque value. These torque screwdrivers are particularly suited for the electronics industry and for instrument assembly work. A simple, cam over design prevents over-tightening and possible damage to components.
Features
Universal 1/4-Inch hex bit holder with strong earth magnet, 3 to 15 inches pounds
I thought I was going to need this tool, but I do not, it is being returned in unopened new condition
Offer versatility for applications that require more than one torque value
Automatic lock in Counterclockwise direction makes fastener removal a snap
Torque settings are easily and accurately changed with a unique adjusting knob and easy to read window scale
Specifications
Manufacturer : Snap-on Industrial Brand CDI Torque
Part Number : 151SM
Item Weight : 8 ounces
Product Dimensions : 8 x 1.5 x 1.5 inches
Item model number : 151SM
Is Discontinued By Manufacturer : No
Size : 1/4-Inch
Style : 3-15 in.lbs
Material : Metal
Torque : 15 Inch Pounds
Item Package Quantity : 1
Number Of Pieces : 1
Head Style : Hex
Measurement System : Inch
Included Components : Torque Screwdriver, Certificate of Calibration
Batteries Included? : No
Batteries Required? : No
Warranty Description : Limited Warranty: Snap-on Industrial Brands warrants that CDI Torque products shall be free from defects in workmanship and materials for the usable life of the product.
ASIN : B001F7VJSE
Customer Reviews : 4.9 out of 5 stars 122 ratings 4.9 out of 5 stars
Best Sellers Rank : #72,422 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #106 in Torque Wrenches
Date First Available : November 19, 2003
Brand : CDI
Item Dimensions LxWxH : 8 x 1.5 x 1.5 inches
Item Torque : 15 Inch Pounds
We are offering a 30-day money-back guarantee!
If you are not satisfied with your purchase within 30 days of receiving the product, you can ship it back to us for a refund or exchange.
Before returning the item, kindly send us a request using the Self-Serve Return option or contact our customer support team to get your return authorization. You may contact us by email at support@mprtools.com, phone at 1-800-905-0410, or chat through our website. We are available Monday to Friday from 8 am to 5 pm ET.
We want to guarantee your experience with us will be outstanding. Here are just a few of the reasons why mprtools.com is the go-to company to get your tools from:
We work very hard to ensure we offer the absolute best prices online. If you find it at a lower price somewhere else within 365 days of purchasing, please message us, and we’ll credit you back the difference right away.
It's our duty to provide superior quality tools you can trust to get the job done. If you're not fully satisfied with your order, you can request a return for a complete reimbursement.
Parfait produit. Meilleur prix sur Amazon que chez notre fournisseur habituel. Le certificat de calibration est conforme à nos besoins.
We use these screwdrivers in a production environment. They last about a year, but by the time we are done with them the insides are caked with zinc dust and grease and the outsides look like they have been beaten with a chain flail. These are the best of all the many models that we have tried. Plus from amazon they are about half the price you would pay from Grainger or Mcmaster.
When considering this tool to purchase - it should be noted that when you are using a tool 24 hours on all shifts (sounds like 24x7) - you also are probably using it more than just once each hour.
Once each hour would result in a 5,000 use cycle occurring every 208 days. However, in a busy industrial environment - using this tool just twice each hour - results in 5000 cycles every 104 days. Essentially - every 90 days. You also have the fact that using any torque wrench in the upper or lower ends - decreases the life of said wrench. All of this information is readily available from CDI. The following are quotes from them as to the care of their tools and torque wrenches in general:
"To determine which torque wrench capacity is best suited for an application, many factors must be considered. However, as a recommendation, use a torque wrench in the middle 50% of the overall capacity of the tool. This will result in longer tool life, ease of use for the operator and increased accuracy from "clicker" type torque wrenches
Torque wrenches should be "exercised" a minimum of three times at 100% of full scale before use
Torque wrenches will last longer if reasonable care is taken. Always unwind handle to the lowest setting after each use. Do not attempt to lubricate the internal torque mechanism. Clean torque wrench by wiping, do not immerse. The wrench should be sent to a qualified calibration lab once every year or every 5000 cycles for re-calibration"
The instructions for this specific micro adjustable torque screwdriver (401sm) - state to have it calibrated and gone through every 5,000 cycles - or one year - whichever comes first. ALL torque wrenches have useful life cycles. CDI is at least being honest - and putting in print - the life cycle and service requirements.
If you use this tool only 3 times each hour - at various settings - you should have it serviced every 69 days minimum. This is just part of the cost of doing business and quality work.
I have owned this tool for quite a number of years (just purchasing another one); and find it extremely adequate for small screws, and misc. fasteners without a lot of mass - which require a torque value; etc. With a very long life span. Easy to grip, very visible (bright blue), and easy to use. An excellent tool with excellent cditorque com support.
I bought this torque driver to do work on my guns. In this job precision is a must. The driver comes with a calibration chart to show its accuracy. It is very easy to adjust from one torque setting to the next and has a very audible click when proper torque is reached. It has a metal body so there's a good weight to it in your hand and it has an easy to read window and bar line for the scale. This tool is made for Snap-On, and anybody that knows tools knows that Snap-On is some of the best with very high standard requirements even for their contracted tools. I would recommend this tool to my friends anytime.
Perfect for small projects. Accurate and repeatable results. Very well built and easy to adjust. You will be surprised at how convenient this torque wrench is.
Adjustable models offer versatility for applications that require more than one torque value. These torque screwdrivers are particularly suited for the electronics industry and for instrument assembly work. A simple, cam over design prevents over-tightening and possible damage to components.
Features
Universal 1/4-Inch hex bit holder with strong earth magnet, 3 to 15 inches pounds
I thought I was going to need this tool, but I do not, it is being returned in unopened new condition
Offer versatility for applications that require more than one torque value
Automatic lock in Counterclockwise direction makes fastener removal a snap
Torque settings are easily and accurately changed with a unique adjusting knob and easy to read window scale
Specifications
Manufacturer : Snap-on Industrial Brand CDI Torque
Part Number : 151SM
Item Weight : 8 ounces
Product Dimensions : 8 x 1.5 x 1.5 inches
Item model number : 151SM
Is Discontinued By Manufacturer : No
Size : 1/4-Inch
Style : 3-15 in.lbs
Material : Metal
Torque : 15 Inch Pounds
Item Package Quantity : 1
Number Of Pieces : 1
Head Style : Hex
Measurement System : Inch
Included Components : Torque Screwdriver, Certificate of Calibration
Batteries Included? : No
Batteries Required? : No
Warranty Description : Limited Warranty: Snap-on Industrial Brands warrants that CDI Torque products shall be free from defects in workmanship and materials for the usable life of the product.
ASIN : B001F7VJSE
Customer Reviews : 4.9 out of 5 stars 122 ratings 4.9 out of 5 stars
Best Sellers Rank : #72,422 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #106 in Torque Wrenches
Date First Available : November 19, 2003
Brand : CDI
Item Dimensions LxWxH : 8 x 1.5 x 1.5 inches
Item Torque : 15 Inch Pounds
We are offering a 30-day money-back guarantee!
If you are not satisfied with your purchase within 30 days of receiving the product, you can ship it back to us for a refund or exchange.
Before returning the item, kindly send us a request using the Self-Serve Return option or contact our customer support team to get your return authorization. You may contact us by email at support@mprtools.com, phone at 1-800-905-0410, or chat through our website. We are available Monday to Friday from 8 am to 5 pm ET.
We want to guarantee your experience with us will be outstanding. Here are just a few of the reasons why mprtools.com is the go-to company to get your tools from:
We work very hard to ensure we offer the absolute best prices online. If you find it at a lower price somewhere else within 365 days of purchasing, please message us, and we’ll credit you back the difference right away.
It's our duty to provide superior quality tools you can trust to get the job done. If you're not fully satisfied with your order, you can request a return for a complete reimbursement.
Parfait produit. Meilleur prix sur Amazon que chez notre fournisseur habituel. Le certificat de calibration est conforme à nos besoins.
We use these screwdrivers in a production environment. They last about a year, but by the time we are done with them the insides are caked with zinc dust and grease and the outsides look like they have been beaten with a chain flail. These are the best of all the many models that we have tried. Plus from amazon they are about half the price you would pay from Grainger or Mcmaster.
When considering this tool to purchase - it should be noted that when you are using a tool 24 hours on all shifts (sounds like 24x7) - you also are probably using it more than just once each hour.
Once each hour would result in a 5,000 use cycle occurring every 208 days. However, in a busy industrial environment - using this tool just twice each hour - results in 5000 cycles every 104 days. Essentially - every 90 days. You also have the fact that using any torque wrench in the upper or lower ends - decreases the life of said wrench. All of this information is readily available from CDI. The following are quotes from them as to the care of their tools and torque wrenches in general:
"To determine which torque wrench capacity is best suited for an application, many factors must be considered. However, as a recommendation, use a torque wrench in the middle 50% of the overall capacity of the tool. This will result in longer tool life, ease of use for the operator and increased accuracy from "clicker" type torque wrenches
Torque wrenches should be "exercised" a minimum of three times at 100% of full scale before use
Torque wrenches will last longer if reasonable care is taken. Always unwind handle to the lowest setting after each use. Do not attempt to lubricate the internal torque mechanism. Clean torque wrench by wiping, do not immerse. The wrench should be sent to a qualified calibration lab once every year or every 5000 cycles for re-calibration"
The instructions for this specific micro adjustable torque screwdriver (401sm) - state to have it calibrated and gone through every 5,000 cycles - or one year - whichever comes first. ALL torque wrenches have useful life cycles. CDI is at least being honest - and putting in print - the life cycle and service requirements.
If you use this tool only 3 times each hour - at various settings - you should have it serviced every 69 days minimum. This is just part of the cost of doing business and quality work.
I have owned this tool for quite a number of years (just purchasing another one); and find it extremely adequate for small screws, and misc. fasteners without a lot of mass - which require a torque value; etc. With a very long life span. Easy to grip, very visible (bright blue), and easy to use. An excellent tool with excellent cditorque com support.
I bought this torque driver to do work on my guns. In this job precision is a must. The driver comes with a calibration chart to show its accuracy. It is very easy to adjust from one torque setting to the next and has a very audible click when proper torque is reached. It has a metal body so there's a good weight to it in your hand and it has an easy to read window and bar line for the scale. This tool is made for Snap-On, and anybody that knows tools knows that Snap-On is some of the best with very high standard requirements even for their contracted tools. I would recommend this tool to my friends anytime.
Perfect for small projects. Accurate and repeatable results. Very well built and easy to adjust. You will be surprised at how convenient this torque wrench is.
Sign up to get the latest guides and special offers sent to your inbox.
1-800-905-0410 (Toll Free)
support@mprtools.com
Opening Hours
Mon - Fri: 8 am - 5 pm ET
Sat & Sun: Closed
great charger
I received it around 3 days after purchasing
No complaints
Great for model building