Great price and excellent tools.
Works very well and last long
Habituellement prête en 4 heures
Commander par téléphone ? Appelez-nous maintenant.
1-800-905-0410Learn more about our Price match policy
Good product... I just ordered the wrong number.
Had it fit my grease gun, it would have done the trick.
Thanks, bm
I purchase this line with a Lincoln grease gun, hold down bracket and needle type fitting. I mounted the whole works on a 4"x1"x18" piece of oak. What I ended up with is a Grease gun that could sit on the ground with a long flexible hose that I use to grease the Cv Joints on my Sand Rail. The needle point lets me get the grease in behind the Cv race to properly lube the joint. I have used this setup for quite a while now and can say that the Lincoln gun and all parts work Flawlessly. I highly recommend the product.
Very nice, top quality product. Shouldn't have no problem reaching the fittings.
In my opinion you have to have some extra length to really get at some of the zirk heads. I drive a truck and grease is an absolute necessity. Not sure why they cost so much but they are handy. If you've ever tried to use one of poor quality or that is too short you will immediately bite the bullet and just buy a decent one.
What can I say? It's a grease hose and does what it should. Very handy for getting in tight spots.
Good product... I just ordered the wrong number.
Had it fit my grease gun, it would have done the trick.
Thanks, bm
I purchase this line with a Lincoln grease gun, hold down bracket and needle type fitting. I mounted the whole works on a 4"x1"x18" piece of oak. What I ended up with is a Grease gun that could sit on the ground with a long flexible hose that I use to grease the Cv Joints on my Sand Rail. The needle point lets me get the grease in behind the Cv race to properly lube the joint. I have used this setup for quite a while now and can say that the Lincoln gun and all parts work Flawlessly. I highly recommend the product.
Very nice, top quality product. Shouldn't have no problem reaching the fittings.
In my opinion you have to have some extra length to really get at some of the zirk heads. I drive a truck and grease is an absolute necessity. Not sure why they cost so much but they are handy. If you've ever tried to use one of poor quality or that is too short you will immediately bite the bullet and just buy a decent one.
What can I say? It's a grease hose and does what it should. Very handy for getting in tight spots.
Good product... I just ordered the wrong number.
Had it fit my grease gun, it would have done the trick.
Thanks, bm
I purchase this line with a Lincoln grease gun, hold down bracket and needle type fitting. I mounted the whole works on a 4"x1"x18" piece of oak. What I ended up with is a Grease gun that could sit on the ground with a long flexible hose that I use to grease the Cv Joints on my Sand Rail. The needle point lets me get the grease in behind the Cv race to properly lube the joint. I have used this setup for quite a while now and can say that the Lincoln gun and all parts work Flawlessly. I highly recommend the product.
Very nice, top quality product. Shouldn't have no problem reaching the fittings.
In my opinion you have to have some extra length to really get at some of the zirk heads. I drive a truck and grease is an absolute necessity. Not sure why they cost so much but they are handy. If you've ever tried to use one of poor quality or that is too short you will immediately bite the bullet and just buy a decent one.
What can I say? It's a grease hose and does what it should. Very handy for getting in tight spots.
Inscrivez-vous pour recevoir les derniers guides et offres spéciales dans votre boîte de réception.
1-800-905-0410 (sans frais)
support@mprtools.com
Horaires d'ouvertures
Du lundi au vendredi : de 8 h 00 à 17 h 00 HE
Sam & Dim: Fermé
Great price and excellent tools.
Works very well and last long