Engineer Inc. PA-09 Quality Universal Mini/Micro Crimper - MPR Tools & Equipment
Engineer Inc. PA-09 Quality Universal Mini/Micro Crimper - MPR Tools & Equipment

Engineer Inc. PA-09 Quality Universal Mini/Micro Crimper

SKU: PA-09
(72)
Sale price
$52.11 CAD
Regular price
$61.74 CAD
You save
$9.63 CAD (16%)

Out of stock!

Frequently Bought Together

Notify Me When Available

Order over the phone? Call us now.

1-800-905-0410
Found a better price elsewhere? Request Price Match

Customer Reviews

Based on 72 reviews
93%
(67)
7%
(5)
0%
(0)
0%
(0)
0%
(0)
A
Anonymous
もうすこし

握り部分が薄く安定感は物足りない

しっかり圧着できるがこの手の物の中では最低限の価格帯だと思うので
頻繁に使う人は2ランクぐらい上のものを検討すると良いかと

A
Anonymous
Great crimper

Very easy to use and honestly works great. My opinion may be somewhat biased because I had a different set of crimpers that just DID not work on the conductor crimp for the smaller connections I had to do a lot.

The PA-09's work great, I cant fault them so far. I would usually wait longer for a review but after doing up the wiring harness for a custom printer I'm very very satisfied with the results, relative to the price. It can be a little fidgety sometimes but not once you get the hang of it.

Works great for molex microfit 3.0 crimp connectors.

Great tool, might try their PAD-11 tool when I can justify the purchase.

A
Anonymous
If you crimp a lot of PCB connectors, don't cheap out and buy these

I bought these to replace some cheaper ratchet crimpers I had bought for crimping XH, PH, DuPont and Molex Mini. So first up I needed two different ratchet tools to cover all those sizes which was nearly the cost of these anyway, then the cheaper ratchets often over crimp and smush your connectors anyway and are fiddly to line up.
These however are precise, i find it very hard to over crimp with them if I have the right slot selected and yet they produce a solid crimp, yes you have to crimp twice (once for the bare wire then once for the insulation) but given how easy it is to get this done because of the thin jaws i actually found it quicker than trying to line up and crimp just the once with the ratchets.
It might seem like a big cost but they cover a wide range of sizes and that means i only need the one tool so buying cheaper ratchets is a false economy.
It is hard to overstate how much of a pleasure these are to use, everything is just tight and well aligned, super comfy to use. Just do yourself a favour and buy them I swear I'm actually looking for more things to crimp they are just that nice.

In summary Buy cheap, Buy twice. Just get these instead, seriously Japanese tools are the best

A
Anonymous
Aln22

The ones they're showing said is made in japan on the handle and on still frame the ones they sent are made in taiwan and few thinks are different like the lock the one that I get have some rivet to keep the pliera close the ones on the picture has bolt also the main plaiers has diferent bolt they still good cuality tools but I donot like the way they said in the description the main reazone I buy this tools suposto be made in Japan. Also the rivet painnits coming off no realky profesionla finish they make the job good but no reeally imprese on the quality

A
Anonymous
Qualität die kostet

Egal ob JST ST, XM, DuPont oder Moles Micro Fit. Die Zange ist perfekt!
100 crimps jetzt hinter mir und nicht einer war lose oder schlecht.

123

FREE TOOL WITH $400+ ORDER

1-YEAR PRICE MATCH GUARANTEE

FREE SHIPPING ON $150+ ORDER

30-DAY MONEY-BACK GUARANTEE

***SAVE ON SHIPPING COSTS - FREE SHIPPING FOR A LIMITED TIME ONLY***

Crimps many different of mini & micro pins (molex, JST, JAE, JRS, AMP, Hirose HRS etc),

Watch the demo video here - http://www.youtube.com/watch?v=xxMYjJ4Lwi0

Pin compatibility chart here - http://www.engineer.jp/en/products/pa09_20applicatn_chart.html

Pro results at a hobbyist price!, further product info here - http://www.engineer.jp/en/products/pa09e.html (PA-09)

Features

  • Ideal for 1.25mm pitch and 2.5mm pitch mico connectors or D-sub connectors (#32-20 wires)

  • With 1 pair of our Connector Pliers, you can crimp in tidy finishing open-barrel connectors such as MOLEX, TE (Tyco), JST, HRS, etc.

  • D-Sub connector contact can be also crimped.

  • 4-different cavities of elaborate dies

  • Original joint screw prevents the joint from being loose and offers you easy maintenance.

  • With locking latch and coiled spring

  • Oil resistant Elastomer (TPR) handle.

Specifications

Manufacturer: Engineer Inc.

Part Number: PA-09

Product Dimensions: 5.7 x 17.5 x 1.2 cm; 135 Grams

Item Package Quantity: 1

Item Weight: 135 g

Shipping

  • We will usually ship your order in 1 to 2 business days! Orders purchased before 2:00 pm EST may be shipped the same day.

  • Your order must have a subtotal of $150 or more to be eligible for free shipping.

  • The delay of your order will depend on your location and from which warehouse your order is shipped from. We will always ship your order from the closest available warehouse. Based on our experience, we estimate the transit time to be between 1 to 3 business days across Canada (excluding NWT, Yukon and Nunavut) and 2 to 5 business days to USA.

  • All orders will be shipped from Canada.

  • You may pick up your order at one of our warehouses, Monday to Friday, from 8 am to 5 pm. Pickup orders are usually ready within 4 hours.

Returns

We are offering a 30-day money-back guarantee!

If you are not satisfied with your purchase within 30 days of receiving the product, you can ship it back to us for a refund or exchange.

Before returning the item, kindly send us a request using the Self-Serve Return option or contact our customer support team to get your return authorization. You may contact us by email at support@mprtools.com, phone at 1-800-905-0410, or chat through our website. We are available Monday to Friday from 8 am to 5 pm ET.

We want to guarantee your experience with us will be outstanding. Here are just a few of the reasons why mprtools.com is the go-to company to get your tools from:

1-Year Price Match Guarantee

We work very hard to ensure we offer the absolute best prices online. If you find it at a lower price somewhere else within 365 days of purchasing, please message us, and we’ll credit you back the difference right away.

30-Day Money-Back Guarantee

It's our duty to provide superior quality tools you can trust to get the job done. If you're not fully satisfied with your order, you can request a return for a complete reimbursement.

Customer Reviews

Based on 72 reviews
93%
(67)
7%
(5)
0%
(0)
0%
(0)
0%
(0)
A
Anonymous
もうすこし

握り部分が薄く安定感は物足りない

しっかり圧着できるがこの手の物の中では最低限の価格帯だと思うので
頻繁に使う人は2ランクぐらい上のものを検討すると良いかと

A
Anonymous
Great crimper

Very easy to use and honestly works great. My opinion may be somewhat biased because I had a different set of crimpers that just DID not work on the conductor crimp for the smaller connections I had to do a lot.

The PA-09's work great, I cant fault them so far. I would usually wait longer for a review but after doing up the wiring harness for a custom printer I'm very very satisfied with the results, relative to the price. It can be a little fidgety sometimes but not once you get the hang of it.

Works great for molex microfit 3.0 crimp connectors.

Great tool, might try their PAD-11 tool when I can justify the purchase.

A
Anonymous
If you crimp a lot of PCB connectors, don't cheap out and buy these

I bought these to replace some cheaper ratchet crimpers I had bought for crimping XH, PH, DuPont and Molex Mini. So first up I needed two different ratchet tools to cover all those sizes which was nearly the cost of these anyway, then the cheaper ratchets often over crimp and smush your connectors anyway and are fiddly to line up.
These however are precise, i find it very hard to over crimp with them if I have the right slot selected and yet they produce a solid crimp, yes you have to crimp twice (once for the bare wire then once for the insulation) but given how easy it is to get this done because of the thin jaws i actually found it quicker than trying to line up and crimp just the once with the ratchets.
It might seem like a big cost but they cover a wide range of sizes and that means i only need the one tool so buying cheaper ratchets is a false economy.
It is hard to overstate how much of a pleasure these are to use, everything is just tight and well aligned, super comfy to use. Just do yourself a favour and buy them I swear I'm actually looking for more things to crimp they are just that nice.

In summary Buy cheap, Buy twice. Just get these instead, seriously Japanese tools are the best

A
Anonymous
Aln22

The ones they're showing said is made in japan on the handle and on still frame the ones they sent are made in taiwan and few thinks are different like the lock the one that I get have some rivet to keep the pliera close the ones on the picture has bolt also the main plaiers has diferent bolt they still good cuality tools but I donot like the way they said in the description the main reazone I buy this tools suposto be made in Japan. Also the rivet painnits coming off no realky profesionla finish they make the job good but no reeally imprese on the quality

A
Anonymous
Qualität die kostet

Egal ob JST ST, XM, DuPont oder Moles Micro Fit. Die Zange ist perfekt!
100 crimps jetzt hinter mir und nicht einer war lose oder schlecht.

123
Description

***SAVE ON SHIPPING COSTS - FREE SHIPPING FOR A LIMITED TIME ONLY***

Crimps many different of mini & micro pins (molex, JST, JAE, JRS, AMP, Hirose HRS etc),

Watch the demo video here - http://www.youtube.com/watch?v=xxMYjJ4Lwi0

Pin compatibility chart here - http://www.engineer.jp/en/products/pa09_20applicatn_chart.html

Pro results at a hobbyist price!, further product info here - http://www.engineer.jp/en/products/pa09e.html (PA-09)

Features

  • Ideal for 1.25mm pitch and 2.5mm pitch mico connectors or D-sub connectors (#32-20 wires)

  • With 1 pair of our Connector Pliers, you can crimp in tidy finishing open-barrel connectors such as MOLEX, TE (Tyco), JST, HRS, etc.

  • D-Sub connector contact can be also crimped.

  • 4-different cavities of elaborate dies

  • Original joint screw prevents the joint from being loose and offers you easy maintenance.

  • With locking latch and coiled spring

  • Oil resistant Elastomer (TPR) handle.

Specifications

Manufacturer: Engineer Inc.

Part Number: PA-09

Product Dimensions: 5.7 x 17.5 x 1.2 cm; 135 Grams

Item Package Quantity: 1

Item Weight: 135 g

Shipping & Returns

Shipping

  • We will usually ship your order in 1 to 2 business days! Orders purchased before 2:00 pm EST may be shipped the same day.

  • Your order must have a subtotal of $150 or more to be eligible for free shipping.

  • The delay of your order will depend on your location and from which warehouse your order is shipped from. We will always ship your order from the closest available warehouse. Based on our experience, we estimate the transit time to be between 1 to 3 business days across Canada (excluding NWT, Yukon and Nunavut) and 2 to 5 business days to USA.

  • All orders will be shipped from Canada.

  • You may pick up your order at one of our warehouses, Monday to Friday, from 8 am to 5 pm. Pickup orders are usually ready within 4 hours.

Returns

We are offering a 30-day money-back guarantee!

If you are not satisfied with your purchase within 30 days of receiving the product, you can ship it back to us for a refund or exchange.

Before returning the item, kindly send us a request using the Self-Serve Return option or contact our customer support team to get your return authorization. You may contact us by email at support@mprtools.com, phone at 1-800-905-0410, or chat through our website. We are available Monday to Friday from 8 am to 5 pm ET.

Guarantees

We want to guarantee your experience with us will be outstanding. Here are just a few of the reasons why mprtools.com is the go-to company to get your tools from:

1-Year Price Match Guarantee

We work very hard to ensure we offer the absolute best prices online. If you find it at a lower price somewhere else within 365 days of purchasing, please message us, and we’ll credit you back the difference right away.

30-Day Money-Back Guarantee

It's our duty to provide superior quality tools you can trust to get the job done. If you're not fully satisfied with your order, you can request a return for a complete reimbursement.

Reviews

Customer Reviews

Based on 72 reviews
93%
(67)
7%
(5)
0%
(0)
0%
(0)
0%
(0)
A
Anonymous
もうすこし

握り部分が薄く安定感は物足りない

しっかり圧着できるがこの手の物の中では最低限の価格帯だと思うので
頻繁に使う人は2ランクぐらい上のものを検討すると良いかと

A
Anonymous
Great crimper

Very easy to use and honestly works great. My opinion may be somewhat biased because I had a different set of crimpers that just DID not work on the conductor crimp for the smaller connections I had to do a lot.

The PA-09's work great, I cant fault them so far. I would usually wait longer for a review but after doing up the wiring harness for a custom printer I'm very very satisfied with the results, relative to the price. It can be a little fidgety sometimes but not once you get the hang of it.

Works great for molex microfit 3.0 crimp connectors.

Great tool, might try their PAD-11 tool when I can justify the purchase.

A
Anonymous
If you crimp a lot of PCB connectors, don't cheap out and buy these

I bought these to replace some cheaper ratchet crimpers I had bought for crimping XH, PH, DuPont and Molex Mini. So first up I needed two different ratchet tools to cover all those sizes which was nearly the cost of these anyway, then the cheaper ratchets often over crimp and smush your connectors anyway and are fiddly to line up.
These however are precise, i find it very hard to over crimp with them if I have the right slot selected and yet they produce a solid crimp, yes you have to crimp twice (once for the bare wire then once for the insulation) but given how easy it is to get this done because of the thin jaws i actually found it quicker than trying to line up and crimp just the once with the ratchets.
It might seem like a big cost but they cover a wide range of sizes and that means i only need the one tool so buying cheaper ratchets is a false economy.
It is hard to overstate how much of a pleasure these are to use, everything is just tight and well aligned, super comfy to use. Just do yourself a favour and buy them I swear I'm actually looking for more things to crimp they are just that nice.

In summary Buy cheap, Buy twice. Just get these instead, seriously Japanese tools are the best

A
Anonymous
Aln22

The ones they're showing said is made in japan on the handle and on still frame the ones they sent are made in taiwan and few thinks are different like the lock the one that I get have some rivet to keep the pliera close the ones on the picture has bolt also the main plaiers has diferent bolt they still good cuality tools but I donot like the way they said in the description the main reazone I buy this tools suposto be made in Japan. Also the rivet painnits coming off no realky profesionla finish they make the job good but no reeally imprese on the quality

A
Anonymous
Qualität die kostet

Egal ob JST ST, XM, DuPont oder Moles Micro Fit. Die Zange ist perfekt!
100 crimps jetzt hinter mir und nicht einer war lose oder schlecht.

123

You May Also Like

Elevate Your Toolbox.

Sign up to get the latest guides and special offers sent to your inbox.